User manual SHARP SD-AT100H

[. . . ] Hänvisa till sidorna i till vi och V-1 till V-74. When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. warning: This unit contains no user serviceable parts. Never remove covers unless qualified to do so. [. . . ] The following are examples of display indicators that appear during DVD playback. Operation When the power is on without a disc TV screen On the unit When resume function can be used. On the playback control screen, various settings can be changed at the same time. (The number of repetition depends on the setting item. ) To change other settings, begin from step 2. To select items directly, use the following buttons. Item Angle Audio language Gamma Super picture Button Press the ANGLE ton. Example: DVD 1 Title number 2 Chapter number 3 Elapsed play time 4 Subtitle 5 Angle 6 7 8 9 Audio language 7 8 Gamma Super picture BITRATE indicator (unchangeable) You can select the desired subtitle or audio language and sound system (Dolby Digital (5. Whilst the disc is stopped or played, press the MENU button to display the disc menu. The procedure shown here provides only general steps. The actual procedure for using the disc menu depends on the disc you are using. Enjoy the surround sound (sound mode) You can en- Stereo joy the stereophonic effect in the home theatre system. The disc recorded in the Dolby Digital system is recognised by this unit automatically when it is played back. one of the digital audio systems for theatrical use. As the sound quality is emphasised, you can enjoy the realistic sound effect in the home theatre system. The disc recorded in the DTS system is recognised by this unit automatically when it is played back. Disc with this trademark Virtual Standard Dynamic sound Stereo You can en- Stereo joy the stereophonic effect in the home theatre system. The disc recorded in the MPEG multichannel audio system is Standard recognised by this unit automatically when it is played back. Dynamic sound When playing a stereo-recorded disc or videotape, it is recog- Stereo (*) nised by the Dolby Pro Logic II function and the sound is Virtual (*) changed to the 5. 1ch digital surround sound automatically. Standard More natural sound effect can be achieved. Dynamic sound If (*) is selected, the " " indicator goes out. [. . . ] There may be some deviations from these values in individual units. Type 2-way type speaker system (Magnetic shield) 80 mm (3-1/8") Woofer 40 mm (1-5/8") Tweeter Maximum input power 50 W 25 W Rated input power 4 ohms Impedance Dimensions Width: 110 mm (4-3/8") Height: 195 mm (7-11/16") Depth: 134 mm (5-5/16") 1. Type 2-way type speaker system (Magnetic shield) 80 mm (3-1/8") Woofer 40 mm (1-5/8") Tweeter Maximum input power 50 W 25 W Rated input power 4 ohms Impedance Dimensions Width: 185 mm (7-5/16") Height: 125 mm (4-15/16") Depth: 134 mm (5-5/16") 1. ) SPEAKER WALL BRACKET Model: AD-AT10SA MAIN UNIT WALL BRACKET Model: AD-AT10WA Use only the specified optional accessories to operate this product properly. [. . . ]