User manual SHARP SF-1116

[. . . ] MODEL SF-1116 SF-1118 ELECTROSTATIC COPYING MACHINE OPERATION MANUAL ·GETTING STARTED ·MAKING COPIES · STATUS INDICATORS ·GENERAL INFORMATION ·OPTIONAL EQUIPMENT Page 2 8 21 26 47 In some areas, the "POWER" switch positions are marked "I" and " " on the copier instead of "ON" and "OFF". The symbol " " denotes the copier is not completely de-energized but in a stand-by condition at this "POWER" switch position. If your copier is so marked, please read "I" for "ON" and " " for "OFF". For a complete electrical disconnection, pull out the main plug. [. . . ] * 1 e ON 1 e ON * 1 e ON 1 e ON * 2 e 60 sec. 6 e 240 min. Factory default settings are indicated with an asterisk (*). NOTE: If you select "0" (OFF) in a program, the corresponding function will be disabled. GENERAL INFORMATION User programs A3 A4 A4 R A5 B4 81/ 2 !13 EXTRA 5 C Press the print ( q ) button. The right-hand number in the copy quantity display will be steadily lit and the entered value will be stored. A4 6 To continue with other user programs, press the key and then repeat steps 2 to 5. To exit the user program mode, press the TRAY SELECT ( ) key. q All the alarm indicators will go out. A4 32 USER PROGRAMS Setting for auditing accounts Setting of user programs No. 10 to 15 varies with the program number. For setting of all programs, first follow steps 1 to 3 in "Setting the user programs" on page 31 to select a program. Press the TRAY SELECT ( ) key for more than 5 seconds. Enter a program number (10 to 15) using the 10-key pad. Press the print ( ) button. ) Then follow the appropriate instructions for the program. Program No. 10: Auditing mode If the auditing mode is enabled, copying is limited to operators with an assigned 3-digit account number. A maximum of 20, 3-digit account numbers can be assigned. 10 is entered, the current setting (0: OFF, 1:ON) will blink on the right side of the copy quantity display. 1. Select the desired setting using the 10-key pad. 1 4 7 0/ 2 5 8 C 3 6 0: 1: OFF ON 9 2. Press the print ( q ) button. The setting will be stored. 3. To continue with other user programs, press the key and enter other program numbers. program mode, press the TRAY SELECT ( GENERAL INFORMATION Program No. 11 is entered, "­­­" will blink in the copy quantity display. q If the number of accounts has reached the upper limit (20), "11E" will appear in the copy quantity display. You will return to step 2 on page 31. 1. Enter a 3-digit account number using the 10-key pad. 1 4 7 0/ 2 5 8 C 3 6 q Any 3-digit number except 000 can be registered as an account number. User programs 2. Press the print ( q ) button. 9 If a number that is already registered or "000" is entered, the number will blink in the copy quantity display. 3. [. . . ] 15 kg (33. 1 lbs. ) (including mounted fittings) OPTIONAL EQUIPMENT 390 mm (W) x 542 mm (D) x 400 mm (H) (15-23/64" (W) x 21-11/32" (D) x 15-3/4" (H)) Specifications are subject to change for improvement without notice. 61 MULTI BYPASS FEEDER (SF-MF15) The multi bypass feeder automatically feeds up to 50 sheets of standard copy paper. Paper guides Specifications Acceptable copy paper (Automatic feed) Weight: 56 to 80 g/m2 (15 to 21 lbs. ) Size: A6 to A3 (5-1/2" x 8-1/2" to 11" x 17") Capacity: Up to 50 sheets, provided the total aggregate thickness does not exceed 5 mm (3/16") (Single sheet feed) Weight: 52 to 128 g/m2 (14 to 34 lbs. ) Size: A6 to A3 (5-1/2" x 8-1/2" to 11" x 17") A4 (8-1/2" x 11") is the maximum size for paper weighing from 104 to 128 g/m2 (28 to 34 lbs. ). 2 kg (4. 5 lbs. ) 350 mm (W) x 493 mm (D) x 185 mm (H) (13-25/32" (W) x 19-27/64" (D) x 7-19/64" (H)) Drawn from the copier Multi bypass feeder (SF-MF15) OPTIONAL EQUIPMENT Specifications are subject to change for improvement without notice. 62 MULTI BYPASS FEEDER (SF-MF15) Using the multi bypass feeder 1 Unfold the multi bypass feeder. q When feeding A4R, B4, or A3 (8-1/2" x 11"R, 8-1/2" x 14", or 11" x 17") sized paper, extend the feeder tray. 2 Set the paper guides to the copy paper width. q Multi bypass feeder (SF-MF15) A6 sized paper must be fed narrow side into the feed slot. 3 Insert the copy paper all the way into the multi bypass feeder. q OPTIONAL EQUIPMENT Up to 50 sheets of standard copy paper measuring from A6 to A3 (5-1/2" x 8-1/2" to 11" x 17") can be loaded in the multi bypass feeder. Transparency film, labels, tracing paper, and other special purpose papers must be fed individually. When adding paper, first remove remaining paper, combine it with the paper to be added and then reload as a single stack. q q 63 MULTI BYPASS FEEDER (SF-MF15) A3 A4 A4 R A5 B4 81/ 2 ! [. . . ]