User manual SHARP SF-2114

[. . . ] For quick reference during copier use, keep this manual in a handy location. This copier can be used as a laser printer. This manual describes only the copier features. For description of the printer features, see the printer operation manual. Conventions used in this manual In this manual, the following icons are used to provide the user with information pertinent to the use of the copier. [. . . ] The auto power shut-off mode saves more power than the preheat mode but requires a longer time before starting copying. To copy from the auto power shut-off mode, press the print ( ) key. Then make desired copier selections and press the print ( ) key using the normal copying procedure. 4 Special functions G Auto clear (page 24) The copier returns to the initial settings a preset amount of time after the last copy is made. This preset amount of time (auto clear time) can be changed. TONER SAVE MODE 1 Press the exposure mode selector key to select the manual ( ) mode. 23 TONER SAVE MODE 2 Press and hold down the exposure mode selector key for approximately 5 seconds. The manual ( ) indicator will go out and the photo ( ) indicator will begin to blink. The exposure indicator marked "5" will light up, indicating the standard toner mode is active. 3 To enter the toner save mode, press the light ( ) key. The exposure indicator marked "1" will light up, indicating the toner save mode is selected. 4 Special functions 4 Press the exposure mode selector key twice. The photo ( ) indicator will stop blinking and the AUTO indicator will light up steadily. To return to the standard mode, repeat the procedure but use the dark ( key to select exposure level "5" in step 3. ) USER PROGRAMS (power save modes, auto clear time) The user programs allow the parameters of certain functions to be set, changed, or canceled as desired. Setting the power save modes and auto clear time 1 2 Press and hold down the light ( ) and dark ( 5 seconds until all the alarm indicators ( , display. ) keys simultaneously for more than , ) blink and "­ ­" appears in the Use the left copy quantity ( ) key to select a user program number (1: auto clear time, 2: preheat mode, 3: auto power shut-off timer, 5: auto power shut-off mode). The selected number will blink in the left side of the display. 24 USER PROGRAMS 3 4 Press the print ( ) key. When the internal counter reaches approximately 17, 000 copies, the drum replacement required ( ) indicator will light up indicating that replacement of the drum cartridge will be needed soon. For more information on purchasing the drum cartridge, see SUPPLY PART NUMBERS AND STORAGE on page 38. When the indicator begins to blink, the copier will stop operating until the cartridge is replaced. Replace the drum cartridge at this time. Do not remove the protective cover on the drum portion (black paper) of a new drum cartridge before use. The cover protects the drum against external light. 5 Supplies and user maintenance 1 Open the side cover while pressing the side cover open button. Then, push gently on both sides of the front cover to open the cover. 2 3 Gently pull the TD cartridge out while pressing the lock release button. To remove the TD cartridge, see page 26, step 2. Hold the handle of the drum cartridge and gently pull the cartridge out. Dispose of the old drum cartridge in accordance with local regulations. 27 DRUM CARTRIDGE REPLACEMENT 4 Remove the new drum cartridge from the protective bag and remove the protective cover from the cartridge. Then gently install the new drum cartridge. [. . . ] Store the supplies in a location that is: G G G clean and dry, at a stable temperature, not exposed to direct sunlight. 2. Store copy paper in the wrapper and lying flat. G Paper stored out of the wrapper or in packages standing on end may curl or get damp, resulting in paper misfeeds. 38 MOVING INSTRUCTIONS When moving this copier, follow the procedure below. When moving this copier, be sure to remove the TD cartridge in advance. 1 2 3 Turn the power switch off and disconnect the power cord. Open the side cover while pressing the side cover open button. [. . . ]