User manual SHARP SF-825

[. . . ] The socket-outlet shall be installed near the equipment and shall be easily accessible. The CE mark logo label is affixed on an equipment in case that the directives described in the above sentence are applicable to the product. (This sentence is not applicable in any country where the above directives are not required. ) CONTENTS GETTING STARTED q Page GETTING STARTED INTRODUCTION The SF-1116 and SF-1118 copiers are designed to provide convenient copying features in a minimum amount of office space and with maximum operational ease. Their main features are: q Space conservation with a fixed platen and a front-loading paper tray q Easy operation q Automatic exposure control q PHOTO mode copying q Convenient functions such as DUAL PAGE COPYING, MARGIN SHIFT, EDGE ERASE, and INTERNAL AUDITOR q Power savings with preheat and auto power shut-off modes The machine can also be equipped with an optional automatic document feeder (ADF) for automatic feeding of original documents and an optional sorter or staple sorter to provide finished copy sets ready for distribution. To ensure optimum use of all copier functions, please familiarise yourself with this manual and the copier. [. . . ] If a mistake is made in steps 2 to 4, press the clear ( You will return to step 2. The program numbers are shown in the table below. For example, to change the setting of the auto clear time, press key 1. Program name Auto clear time Preheat mode Auto power shut-off timer Auto power save control Stream feeding mode Sorter bin access mode Auditing mode Account number entry Account number change Account number deletion Number of copies per account Resetting account Auto power shut-off setting Program No. 1 2 3 4 5 7 10 11 12 13 14 15 20 GENERAL INFORMATION q ) key. 9 % q For operation of these programs after step 3, see page 33. User programs 3 ZOOM Press the print ( q ) button. For programs 1 to 7 and 20, the entered program number will be steadily lit on the left side of the copy quantity display and the currently selected parameter number for the program will blink on the right side. For programs 10 to 15 (programs for auditing accounts), the display varies with the program number. See page 33 for setting programs 10 to 15. % q 31 USER PROGRAMS 1 4 7 0/ 2 5 8 C 3 6 4 ZOOM Select the desired parameter using the 10-key pad. q The entered parameter number will blink on the right side of the copy quantity display. The parameters are shown in the table below. For example, to change the setting of the auto clear time to "90 sec. ", press key 3. q 9 % Program name Auto clear time Preheat mode Auto power shut-off timer Auto power save control Stream feeding mode Sorter bin access mode Auto power shut-off setting Parameters 0 e OFF 3 e 90 sec. 0 e OFF * 0 e OFF 0 e OFF * 0 e OFF 1 e 30 sec. * 1 e ON 1 e ON * 1 e ON 1 e ON * 2 e 60 sec. To continue with other user programs, press the key and enter other program numbers. program mode, press the TRAY SELECT ( 33 USER PROGRAMS Program No. 12 is entered, an account number will appear in the copy quantity display. q If no account number has been registered, "12E" will appear in the copy quantity display. You will return to step 2 on page 31. 1. Use the copy ratio display ( account number to be changed. ZOOM q ) key to select the Use the key to advance through the account numbers. % 2. Press the print ( q ) button. "­­­" will blink in the copy quantity display. 3. Enter a new account number using the 10-key pad. 1 4 7 0/ 2 5 8 C 3 6 4. Press the print ( q ) button. 9 If a number that is already registered or "000" is entered, the number will blink in the copy quantity display. 5. Repeat steps 1 to 4 for other account numbers. To continue with other user programs, press the key and enter other program numbers. [. . . ] A3 (11" x 17") A6 (5-1/2" x 8-1/2") A3 (11" x 17") A5 (5-1/2" x 8-1/2") Paper size Drawn from the copier Approx. 9. 8 kg (21. 6 lbs. ) (including mounted fittings) 335 mm (W) x 493 mm (D) x 298 mm (H) (13-13/64" (W) x 19-27/64" (D) x 11-47/64" (H)) SF-S54 No. of bins Bin capacity 10 NON-SORT: SORT/ STAPLE SORT: GROUP: 100 sheets (top bin) 30 sheets (A5, A4, A4R (5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R)) 15 sheets (B4, A3 (8-1/2" x 14", 11" x 17")) 20 sheets (A5, A4, A4R (5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R)) 15 sheets (B4, A3 (8-1/2" x 14", 11" x 17")) Max. A3 (11" x 17") A6 (5-1/2" x 8-1/2") A3 (11" x 17") A5 (5-1/2" x 8-1/2") 10-bin sorter (SF-S17N) 10-bin staple sorter (SF-S54) Paper size Top bin: Sort bins: Stapling capacity Power supply Weight Dimensions 30 sheets (80 g/m2 (21 lbs. )) Drawn from the copier Approx. [. . . ]