User manual SHARP SF-8200

[. . . ] -When there is not enough recordable space on an MD the following will display: First, "TTL" followed by the number of tracks and time that will record. This will be followed by a different display, "OVR" followed by number of tracks and time that cannot be recorded. [. . . ] This will be followed by a different display, "OVR" followed by number of tracks and time that cannot be recorded. -To continue recording anyway press HIGH or NORMAL -To quit press MD STOP key pg40/41 Manually adjusting recording level 1-Stop CD playback and switch source to CD 2-Press VOL BACK/FORWARD to choose track numbers to be recorded 3-Press REC MODE to choose recording mode 4-Press CD PLAY 5-Press REC, pause the recording 6-Press REC LEVEL/CURSOR to adjust the level -Levels can be adjusted from -4db to 10db in 2db increments 7-Press CD STOP 8-Press BACK/FORWARD to choose track once more 9-Press CD PLAY to begin recording pg42 Checking recording mode and remaining time available 1-When playback is stopped press REC MODE repeatedly to view different recording modes and and time remaining pg43 Checking display when recording 1-Press DISPLAY repeatedly to show: -Elasped time -MD/CD track titles -Level meter -Remaining recordable time pg43 Recording radio broadcasts to MD 1-Set station to be recorded 2-Insert a recordable MD 3-Press REC MODE to choose recording mode 4-Press REC 5-Press PLAY on MD, recording will begin -When recording from the radio the total time recorded will become one track on the MD. Stopping or pausing during recording will create a new track pg44 Creating a new track while recording 1-To create a new track during recording without interruption press REC during recording at point where new track is desired pg45 Recording only prrgrammed tracks from CD to MD Hyper Track Edit 1-Switch source to CD 2-Insert CD and recordable MD 3-Press BACK/FORWARD keys to choose track number 4-Press TRACK key to set track number 5-Repeat steps 3-4 until all tracks to be recorded are set (up to 20 tracks can be programmed) 6-Choose HIGH or NORMAL to begin recording pg47 Recording while listening to a CD 1-While listening to desired track press TRACK 2-After track is set press CD STOP 3-Press HIGH or NORMAL to begin recording pg47 Recording from the beginning of a previously recorded MD Top Position Edit -With this function new tracks can be recorded on to the beginning of the MD, all previously recorded tracks will come after 1-Prepare for recording 2-Press TOP POSITION key, press once more to set 3-Begin recording, if CD press HIGH or NORMAL, if radio press REC then MD PLAY pg48 Copying track titles from CD-TEXT CDs 1-Begin recording 2-Press NAME/TOC EDIT while track to be copied is playing 3-Press ENTER within 10 seconds, the current track title information will display 4-Press ENTER once again before the track recording finishes pg49 About high speed recording -With this unit CD to MD recording can be done in approx. half the normal time in High Speed Recording Mode, however some restrictions apply. High speed copying limitations: After the first copy of a CD is made there is an automatically imposed waiting period before another high speed copy of the same CD can be made. Set clock then return to timer function 2-Press BACK/FORWARD to choose "Timer set" 3-Press ENTER, "Time play" will display 4-Press BACK/FORWARD to choose timer mode: -Timer Play: music alarm, pre-set time playback -Timer Rec: record by timer 5-Press ENTER 6-Press BACK/FORWARD to set hour unit will turn ON, press ENTER 7-Press BACK/FORWARD to set minute, press ENTER -Holding down BACK/FORWARD keys moves time forward in 5 minute increments 8-Press BACK/FORWARD to set hour unit will turn OFF, after completion press ENTER 9-Press BACK/FORWARD to set minute, press ENTER 10-When using timer for alarm: press BACK/FORWARD keys to choose playback source MD-CD-TUNER-AUX, then press ENTER -When using timer for recording press BACK/FORWARD keys to choose recording source: Tuner-Aux, then press ENTER -When tuner is choosen press BACK/FORWARD to choose radio pre-set station number, press ENTER (You can only choose pre-set stations at this point, if the station to be recorded has not been pre-set follow the instructions to pre-set a station then redo the "Setting timer" set-up) 11-Press BACK/FORWARD keys to set volume level, press ENTER 12-After step 11 display will blink "Timer" or "Timer Rec" and settings will display then power will turn off automatically. "Timer" light will turn on on main unit. -Unplugging power cord or a power outage will erase all time settings!pg63/64 Using timer again with previous settings 1-Press TIMER/DELETE 2-Press CURSOR BACK/FORWARD to choose "standby" 3-Press ENTER, previously input settings will display and power will automatically turn offunit will be in stand-by mode pg65 Reconfirming timer settings 1-When unit is in "timer" or "timer record" standby mode press TIMER/DELTE 2-Press BACK/FORWARD keys to choose "Timer call" 3-Press ENTER and timer settings will display then unit will return to stand-by mode -To make changes to timer settings: Start from step one of "Setting timer" pg65 Cancelling timer -When unit is in timer stand-by mode (power off) turning "On" the main unit power will cancel timer operations -To cancel without turning on power: 1-Press TIMER/DELETE 2-Press BACK/FORWARD to choose "Cancel" 3-Press ENTER -The timer operation will cancel but the settings will not be erased pg66 Using sleep timer 1-While music to be used for sleep timer is playing press TIMER/DELETE 2-Press BACK/FORWARD to choose "Sleep" 3-Press ENTER 4-Press BACK/FORWARD to set time until unit will turn off (time can be set from 1 minute to 2 hours) 5-Press ENTER and "Sleep timer" function begins, after entered time elapses unit will turn off pg66 Checking remaining time while in sleep timer mode 1-Press TIMER/DELTE 2-Press BACK/FORWARD to choose "Sleep" remaining time displays on right. -While remaining time displays press ENTER to change time Cancelling sleep timer -Turning off power cancels sleep timer, to cancel without turning off power: 1-While in sleep timer mode press TIMER/DELETE 2-Press BACK/FORWARD to choose "Sleep off", press ENTER pg66 Use sleep and timer function together -You can, for example, listen to the radio in sleep mode then use the alarm timer later. [. . . ] pg63/64 Using timer again with previous settings 1-Press TIMER/DELETE 2-Press CURSOR BACK/FORWARD to choose "standby" 3-Press ENTER, previously input settings will display and power will automatically turn offunit will be in stand-by mode pg65 Reconfirming timer settings 1-When unit is in "timer" or "timer record" standby mode press TIMER/DELTE 2-Press BACK/FORWARD keys to choose "Timer call" 3-Press ENTER and timer settings will display then unit will return to stand-by mode -To make changes to timer settings: Start from step one of "Setting timer" pg65 Cancelling timer -When unit is in timer stand-by mode (power off) turning "On" the main unit power will cancel timer operations -To cancel without turning on power: 1-Press TIMER/DELETE 2-Press BACK/FORWARD to choose "Cancel" 3-Press ENTER -The timer operation will cancel but the settings will not be erased pg66 Using sleep timer 1-While music to be used for sleep timer is playing press TIMER/DELETE 2-Press BACK/FORWARD to choose "Sleep" 3-Press ENTER 4-Press BACK/FORWARD to set time until unit will turn off (time can be set from 1 minute to 2 hours) 5-Press ENTER and "Sleep timer" function begins, after entered time elapses unit will turn off pg66 Checking remaining time while in sleep timer mode 1-Press TIMER/DELTE 2-Press BACK/FORWARD to choose "Sleep" remaining time displays on right. -While remaining time displays press ENTER to change time Cancelling sleep timer -Turning off power cancels sleep timer, to cancel without turning off power: 1-While in sleep timer mode press TIMER/DELETE 2-Press BACK/FORWARD to choose "Sleep off", press ENTER pg66 Use sleep and timer function together -You can, for example, listen to the radio in sleep mode then use the alarm timer later. [. . . ]