User manual SHARP SG-F10H/CP-F20H

[. . . ] q The AC adaptor may be different from the one in the drawing. 2 Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) Contents Important Introduction Special Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Names of Controls and Indicators . . . . . . . . . . . . . . 7-9 Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] q The SOUND button on the remote control can also be used to create track numbers. 34 Note: q When making digital recordings using a CD player or an MiniDisc player, track numbers will be created automatically regardless of the setting of the auto marker function. Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) Advanced Recording (continued) Numbering restriction If you try to number more than 10 tracks in certain amount of time, "SORRY" will be displayed and the operation will be disabled. In that case, wait until the next operation can be resumed. In stereo recoding Within 40 seconds In 2 times long recording Within 80 seconds In 4 times long recording Within 160 seconds In monaural recording Within 80 seconds About sampling rate converter This portable MD incorporates a sampling rate converter meaning it can record from digital radios or DAT tape recorders. Automatic numbering (in digital recording) When recording from a CD or a MiniDisc using the digital connection, track numbers will be created at the same points as on the CD or MiniDisc (Synchro marker function). First track Second track Third track Playback side You can not copy a MiniDisc that you recorded from digital inputs to another MiniDisc or DAT. It is prevented by the SCMS (Serial Copy Management System). Recording from analogue inputs is not affected. Digital signals CD player, MiniDisc player, etc. Digitally recorded MiniDisc Cannot record Track A Track B Track C First track Second track Third track Recording side Track A Track B Track C q Track numbers may not be created in proper places, Digital connection Digital connection depending on the source to be recorded from, such as signals with noise. q The track numbers on the playback side may not match the track numbers recorded on the MiniDisc. q When recording, if a programmed playback is performed by the source or playback is performed by selecting tracks manually, the MiniDisc track numbers may not be the same as on the source. q Track numbers may not be created properly, depending on the connected stereo system. Recharge the battery or replace the alkaline battery with a new one. q When the battery has run completely out, "BATT EMPTY (LoBATT)" will appear. Then, the power will be disconnected automatically. Notes: q If you use the battery which you stopped charging halfway, " " may appear. It does not mean that the battery is completely charged. q The battery indicator will not correctly display the remaining capacity for approximately 20 seconds after the power has been turned on. q When the AC adaptor or a separately available car adaptor is used, the battery indicator will not be shown. q The number of bars shown in the battery indicator may increase or decrease, depending on the operation being performed. This is normal. 40 Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) Changing Default Settings Whilst in the stop mode . . . 1 MENU BEEP ON confirmation sound A-PLAY ON auto play AUTO Psave auto power save D. L MODE 1 digital recording level LIGHT NORM 3-colour LED illumination backlight on the remote control display on the remote control SETTING ITEM BEEP ON* BEEP OFF Beep Silent With a MiniDisc inserted, press the MODE button for 2 seconds or more. "SET UP" will appear. q When you release the button, "BEEP ON" or "BEEP OFF" will appear. A-PLAY ON* A-PLAY OFF AUTO Psave* Psave OFF D. L MODE 1* D. L MODE 2 Psave OFF Setting Cancelled Setting Cancelled Setting keep Cancelled Cancelled 2 3 4 Press the 5 or 4 button to display the menu. Press the MODE button to switch items. Press the · s / :OFF button. LIGHT NORM* See next LIGHT ALL page. LIGHT OPER LIGHT OFF (*) indicates default setting. Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) 41 ­ Changing Default Settings ­ Useful Features Changing Default Settings : continued Beep sound You can eliminate the confirmation sound that beeps when you press a button. Operation indicator, backlight on the remote control and display on the remote control The illuminating pattern of the 3-colour LED and the remote control can be changed. [. . . ] 400 ­ 1, 350 rpm ACIRC (Advanced Cross Interleave Reed-Solomon Code) ATRAC (Adaptive Transform Acoustic Coding), 24-bit computed type Magnetic modulation overwrite method 44. 1 kHz (32 kHz and 48 kHz signals are converted to 44. 1 kHz, and then recorded. ) Unmeasurable (less than ±0. 001% W. peak) Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) ­ Specifications ­ TERMS OF GUARANTEE Subject to the terms listed below, Sharp Electronics (U. K. ) Ltd. (hereinafter called "the Company") guarantee to provide for the repair of, or at its option replace this Sharp Equipment, or any component thereof, (other than batteries), which is faulty or below standard, as a result of inferior workmanship or materials. The conditions of this guarantee are: 1. [. . . ]