User manual SHARP SG-W2CDH

[. . . ] Please confirm that the following accessories are included. Only the above accessories are included. Please ensure that the equipment is positioned in a well-ventilated area and ensure that there is as least 10 cm (4") of free space along the sides, top and back of the unit. Warning: The voltage used must be the same as that specified on this unit. [. . . ] The stations saved in memory can be scanned automatically. Within 30 seconds, press the 5 3 PRESET X or W PRESET 2 4 button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1. Within 30 seconds, press the MEMORY/SET button to store that station in memory. To erase entire preset memory Press the POWER button whilst holding down the TUNER (BAND) button and XBASS/DEMO button until "TUNER CL" appears. If the "MEMORY" and preset number indicators go out before the station is memorised, repeat the operation from step 2. Repeat steps 1 - 4 to set other stations, or to change a preset station. When a new station is stored in memory, the station previously memorised will be erased. The backup function protects the memorised stations for a few hours should there be a power failure or the AC power lead disconnection. The preset number will flash and the programmed stations will be tuned in sequentially, for 5 seconds each. ) Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. For a Dolby digital 1/0 input, monaural sound will be output from the front speakers. You cannot use the Normal/Phantom and Dolby Digital surround features with headphones. When headphones are connected to the headphone socket, the Normal/Phantom and Dolby Digital surround modes will be cancelled. In order to activate the Normal/Phantom modes, you must press the NORMAL or PHANTOM button. Three-dimensional stereo image processing modifies the sound for the 2 front speakers to make it seem as if surround speakers were sending signals, even though they are not actually used. You can enjoy a three-dimensional surround stereo image using just the 2 front speakers. When a Dolby digital signal is being input, " will appear. The initial set up was made when shipped from the factory. The unit can be used as it is, straight out of the box. Repeat the operation in steps 2 and 3 above to select "SURROUND", "CENTER" and "S-WOOFER". Each of these items can be set separately. [. . . ] Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol. When cleaning the heads, pinch rollers, etc. Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth. Do not use oil, solvents, petrol, paint thinners or insecticides on the unit. [. . . ]