User manual SHARP SG-160H

[. . . ] Customers without Internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland). 0101 2 Insert the batteries as shown. 1 Accessories 3 Replace the cover. AC power lead 1 Remote control 1 FM/AM loop aerial 1 ­1­ TINSE0111SJZZ 02J N YT 1 3 System connections FM aerial AM loop aerial TV Right speaker Left speaker VCR, DVD, etc. To the line output sockets RCA lead (not supplied) 4 Turn on your system Wall socket (AC 230 V, 50 Hz) Press the ON/STAND-BY button to turn the power on. Right speaker Left speaker White line Black ­2­ Listening to a CD PUSH CLOSE Listening to the radio 1 2 3 Press the FUNCTION button until "CD STOP" appears on the display. [. . . ] To the line output sockets RCA lead (not supplied) 4 Turn on your system Wall socket (AC 230 V, 50 Hz) Press the ON/STAND-BY button to turn the power on. Right speaker Left speaker White line Black ­2­ Listening to a CD PUSH CLOSE Listening to the radio 1 2 3 Press the FUNCTION button until "CD STOP" appears on the display. Press the CD EJECT button to open the CD compartment. 1 2 Press the FUNCTION button until "FM" or "AM" appears on the display. or ) button to tune in to the desired sta- Place a CD on the spindle, label side up. When the TUNING button is pressed for more than 0. 5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. To receive an FM stereo transmission: Press the FUNCTION button to display the "ST" indicator. " " will appear when an FM broadcast is in stereo. FM stereo mode indicator 4 5 Close the CD compartment by firmly pushing the corner marked "PUSH CLOSE". If fingerprints or dust accumulate on the pickup, clean it gently with a dry cotton swab. Cleaning the tape-handling parts · Dirty heads, capstan or pinch roller can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol. · When cleaning the heads, pinch roller, etc. , unplug the unit which contains high voltages. A Erase head A B C D If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on. B Recording/ Playback head C Capstan D Pinch roller Note: If neither operation above restores the unit, clear all the memory by resetting it. · After long use, the deck's heads and capstan may become magnetised, causing poor sound. [. . . ] If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on. B Recording/ Playback head C Capstan D Pinch roller Note: If neither operation above restores the unit, clear all the memory by resetting it. · After long use, the deck's heads and capstan may become magnetised, causing poor sound. [. . . ]