User manual SHARP SJ-BA05IMXRE-EU

[. . . ] Your fridge freezer conforms to current safety requirements. inappropriate use can lead to personal injury and damage to property. To avoid the risk of damage read this manual carefully before using your fridge freezer for the first time. It contains important safety information on the installation, safety, use and maintenance of your Fridge Freezer. [. . . ] After the chiller shelf has been removed, it can support a maximum 16 kg load. Humidity Controller (In some models) When the humidity controller is in the closed position, it allows fresh fruit and vegetables to be stored for a longer time. In the event the crisper is full, the fresh dial that is located in front of the crisper, should be opened. By means of this, the air in the crisper and humidity rate will be controlled and the shelf life will be extended. If you see any condensation on the glass shelf, the humidity control should be placed into the open positions. Bottle holder (In some models) In order to prevent the bottles to slip or fall over you can use the bottle holder. You can also prevent making noise that will be done when you open or close the door. Adapti-Lift Door Shelf (In some models) Six different height adjustments can be made to provide storage areas that you need by Adapti-Lift. To change the position of Adapti-Lift ; Hold the bottom of the shelf and pull the buttons on the side of the door shelf direction of arrow (Fig. 1) Position door shelf the height you need by moving up and down. After you get the position that you want the door shelf, release the buttons on the side of the door shelf (Fig. 2) Before releasing the door shelf, move up down and make sure the door shelf is fixed Note: Before moving door shelf is loaded, you must hold the shelf by supporting the bottom. Otherwise, door shelf could fall off the rails due to the weight. So damage may occur on the door shelf or rails. Visual and text descriptions on the accessories section may vary according which model you have. Make sure to unplug the fridge before starting to clean it. Do not wash your fridge by pouring water. You can wipe the inner and outer sides with a soft cloth or a sponge using warm and soapy water. Remove the parts individually and clean with soapy water. Never use flammable, explosive or corrosive material like thinner, gas, acid for cleaning. You should clean the condenser with broom at least once a year in order to provide energy saving and increase the productivity. Make sure that your fridge is unplugged while cleaning. [. . . ] En sådan anvendelse vil medføre, at garantien for apparatet bortfalder, og vores virksomhed vil ikke være ansvarlig for tab, der vil opstå. Fryserens indledende temperatur på -18 °C vises på indikatoren for justering af fryseren, mens køleskabets indledende temperatur på +4 °C vises på indikatoren for justering af køleskabet. Når superfrystilstanden er valgt, tændes indikatorens symbol for superfrys og maskinen bipper for at bekræfte, at tilstanden er slået til. Vi anbefaler, at køleskabet ikke bruges uden for de angivne temperaturværdigrænser for at sikre en effektiv køling. [. . . ]