User manual SHARP SJ-L2160M0X-EU

[. . . ] Your fridge conforms to current safety requirements. inappropriate use can lead to personal injury and damage to property. To avoid the risk of damage read this manual carefully before using your fridge for the first time. It contains important safety information on the installation, safety, use and maintenance of your Fridge. [. . . ] Turn 90 degrees (as shown in the diagram). This will keep the condenser from touching the wall. Fridge should be placed against a wall with a free distance not exceeding 75 mm. Before setting up your fridge, check for any visible damage. Do not install or use your fridge if it is damaged. When using your fridge for the first time, keep it in an upright position for at least 3 hours before plugging into the mains. This will allow efficient operation and prevents damage to the compressor. You may notice a light odor when using your fridge for the first time. This is perfectly normal and will fade away as the fridge starts to cool. This figure has been drawn for information purposes to show the various parts and accessories in the appliance. Parts may vary according to the model of the appliance. Thermostat automatically regulates the inside temperature of the refrigerator compartment. By rotating the knob from position « 1 » to « 5 », colder temperatures can be obtained. Larders (coolers) have not any freezer compartment but can cool below 5°C. Important note: Do not try to rotate knob beyond 1 position it will stop your appliance. For short-term storage of food in the refrigerator compartment, you can set the knob between minimum and medium position. (1-3) · For long-term storage of food in the refrigerator compartment, you can set knob to medium position. (3-4) · Note that; the ambiant temperature, temperature of the freshly stored food and how often the door is opened, affects the temperature in the refrigerator compartment. The ambient temperature, temperature of the freshly stored food and how often the door is opened, affects the It is not recommended that you operate your fridge in environments colder than 10°C . The temperature setting should be set by taking into consideration how often the fridge door is opened and closed, how much food is stored in the fridge and the environment in which and the positioning of the appliance. We recommend that when first using the fridge it should be left running for 24 hours uninterrupted to ensure it is completely cooled. Do not open the fridge door, or put food inside for this period. [. . . ] The evaporating tray and the defrost water drain hole should be cleaned periodically to prevent the water from collecting on the bottom of the refrigerator. Replacing LED Lighting If your fridge has LED lighting contact the Sharp help desk as this should be changed by authorized personnel only. To reduce frost build up never place liquids with unsealed containers in the fridge compartment. Allow warn or hot food to cool down before storing. [. . . ]