User manual SHARP SJ-T690R annexe 1

[. . . ] Do not attempt to change or modify this refrigerator. this may result in fire , electric shock or injury. Ensure that the refrigerator presents no danger to children while being stored for disposal. Do not install the refrigerator in a damp or wet location as this may cause damage to the insulation and a leak. [. . . ] This refrigerator is provided with a indicator of temperature in the refrigerator compartment to allow you to control the average temperature in the coldest zone. (The door pocket positioned at the same height isn't the coldest zone. You can carry out regular checks to ensure the temperature in the coldest zone is correct and, if necessary, adjust the refrigerator temp. To maintain a correct temperature inside the appliance, check that the indicator of temperature is always BLUE. If the indicator of temperature turns WHITE, the temperature is too high; in this case, increase the refrigerator temp. Control setting and wait for 6 hours before checking the indicator of temperature again. As the ambient temperature of the room, the amount of food stored and the frequency of door opening. When fresh food has been introduced or the door has been left open for some time, it is normal for the indicator of temperature to turn WHITE. To maximize the shelf life of perishable food products, ensure that the food is the freshest possible quality. The following is a general guide to help promote longer food storage. Evenly place the food on the shelves to allow the cooling air to circulate efficiently. Hot foods should be cooled before storing. Storing hot foods increases the temperature in the unit and increases the risk of food spoilage. Do not block the outlet and inlet of the cool air circulating circuit with foods or containers; otherwise the foods will not be evenly cooled throughout the refrigerator. Freeze small quantities of food at a time to freeze them quickly. Food should be properly stored or covered and the air should be removed to seal tightly. To prevent damage to your refrigerator, do not use heavy This may lead to rusting and deterioration of the electrical insulation. To prevent cracking on inside surfaces and plastic components, follow these tips. Some household chemicals may cause damage, so use only diluted washing-up liquid (soapy water). If undiluted detergent is used or soapy water is not wiped off thoroughly, cracking of plastic parts can result. Duty cleansers or solvents (lacquer, paint, polishing powder, benzine, boiled water, etc. If the power supply is disconnected, please wait for at least 5 minutes before re-connecting power. [. . . ] Dealer, even if you don't purchase a new product. Further collection facilities are listed on the homepage of www. Dumneavoastr este marcat cu acest simbol Eliminând acest produs în mod corect contribuii la tratarea, valorificarea i reciclarea corespunztoare a deeurilor, prevenind astfel efectele negative asupra sntii umane i a care indic c mediului care pot aprea în urma managementului necorespunztor al deeurilor. Keep the ventilation space as much as possible around the refrigerator. [. . . ]