User manual SHARP SMSX1 OPERATION MANUAL

[. . . ] However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your LCD colour TV product, please read the following precautions carefully before using the product. I Read instructions--All operating instructions must be read and understood before the product is operated. [. . . ] You can select channels using Channel Select or CH ( )/( ). To handle the increasing number of channels available, this LCD TV set allows you to select up to 200 channels (0 to 199). When selecting the channel using Channel Select, finish inputting the channel number by holding down the button for the last digit for a moment. You can select channels using Channel Select or CH ( )/( ). To handle the increasing number of channels available, this LCD TV set allows you to select up to 200 channels (0 to 199). When selecting the channel using Channel Select, finish inputting the channel number by holding down the button for the last digit for a moment. Press Volume (­) Decrease contrast Lower colour intensity Less bright Soft picture Less green More red Toward purple ­ ­ ­ Choice/Value range 0 ­ 60 -30 ­ 30 -30 ­ 30 0­5 -5 ­ 5 -5 ­ 5 -15 ­ 15 dark medium off off on on bright Press Volume (+) Increase contrast Higher colour intensity More bright Sharp picture More green More blue Toward green ­ ­ ­ (* The choices differ depending on whether or not a NICAM or IGR signal is received. * These items are not displayed when the "Sound via" item is set to "Hi-fi". Stereo-video recorders should select "Sound1+2" so that the desired sound can be selected when playing back the video. The currently selected programme is displayed in blue, and the child-locked programmes are displayed in red. To display the next or previous list of the Programme table, press ]/[ when the cursor is at a programme in the lower-right or upper-left position, or press </> when the cursor is at a programme in the right or left column. 196 The influence of the AV control voltage and of fast blank at programme positions from 1 to 196 can be set. Notes: I If the item concerned is set to "yes", the appropriate picture is through-connected at all programme positions from 1 to 196 when a control voltage/an RGB signal is applied. The Child Lock function blocks the viewing of any channel for which the child lock has been set. To use the Child Lock function, you first need to define your PIN (Personal Identification Number). Notes: I Be sure to make a note of your PIN before pressing OK. For example, if the current clock time is 9:00 and the time limit is specified from 22:00 to 14:00, the lock is effective from 9:00 to 14:00. I When a Child Lock is set for all programmes with a time limit, the "Time and date" item is not displayed in the TV menu and cannot be selected. Description Select "yes" to activate the Child Lock immediately (after the LCD TV set has been turned off and on again). The lock remains effective until "no" is selected. input the start and end time for a daily-recurring Child Lock. The lock is activated everyday unless "no" is selected. [. . . ] Before calling for repair services, make the following checks for possible remedies to the symptoms encountered. Make sure the AC adapter is properly inserted in the power outlet. Reception other than that of broadcasting stations can be considered. Make sure the main power switch of the main unit is on. [. . . ]