User manual SHARP SYSTEM-Q8H

[. . . ] I Ce système est équipé d'une technologie de protection contre les copies qui cause une importante dégradation de l'image quand le contenu d'un disque est copié sur une vidéocassette. Copy Protection: This unit supports Macrovision copy protection. On DVD discs that include a copy protection code, if the contents of the DVD disc are copied using a VCR, the copy protection code prevents the videotape copy from playing normally. 4, 631, 603, 4, 577, 216, 4, 819, 098, and 4, 907, 093, licensed for limited viewing uses only. This product incorporates copyright protection technology that is protected by method claims of certain U. S. [. . . ] (When a disc with no angle is played back, "xx" is displayed. ) You can select the desired angle. Audio setting (page 35) The type of audio currently selected is displayed. You can select the desired type of audio. 3-D Virtual Surround setting (page 35) Available when DVD discs recorded in Dolby Digital are played. You can activate/deactivate the setting or change the level. Digital gamma setting (page 36) You can make the entire image easier to see by brightening the darker and obscure portions. You can activate/deactivate the setting or change the level. Digital super picture setting (page 37) This function enhances the fine details of the image and outlines of the objects by reducing the amount of picture noise. You can activate/deactivate the setting or change the level. SYSTEM-Q8H ENGLISH 2 3 4 To exit the setup operation, press the RETURN button. This returns to the screen that was shown before the setup screen was displayed. Direct title skip Direct chapter skip Direct time skip Subtitle Angle Audio 3-D Virtual Surround Digital gamma Digital super picture 6 1 2 3 4 5 6 7 G S 5 I 2/5 8 / 30 01 : 30 : 08 2 E NG L I S H 1 D 1 5. 1 c h ON 0 BIT RATE ON ON ENTER 7 DVD I 6 I I 7 8 0 10 Mbps 9 I I 8 G 8 9 SELECT ENTER RETURN I 10 I BITRATE indicates the amount of data that is being transferred to the unit per second. I With certain types of discs, you can change the audio using the disc menu (see page 40). I You can also press the SOUND button whilst pressing down the SHIFT button on the remote control for the same operation in step 3. (You can skip steps 1 and 2. ) E-35 *DV777W_EP32-35 35 12/4/04, 13:49 SYSTEM-Q8H (Z) TINSZA083AWZZ Using the function control (continued) H Digital gamma setting Digital gamma is a digital image quality enhancement function that gives a richer image by brightening the darker and more obscure portions of the image without altering the brightness of the brighter portions, thereby making the entire image easier to see. Perform the following procedure to change the setting between "ON" and "OFF", and the level for the digital gamma setting. SYSTEM-Q8H ENGLISH 1 2 3 4 5 Note: Press the SET UP button whilst pressing down the SHIFT button during playback. Use the cursor L or M button and then press the to select ENTER button. G G S 2 L P CM N 5. 1 c h 0 0 ON BIT RATE ON SELECT ENTER 10 Mbps ENTER RETURN Press the cursor L or M button to select "ON" or "OFF". Whilst "ON" is selected, use the cursor 1 or 0 button to change the level setting. G S 2 L P CM N 5. 1 c h ON ON 0 0 10 BIT RATE Mbps SELECT ENTER ENTER RETURN Press the ENTER button to confirm the setting. You can exit the function control screen by pressing the SET UP button whilst pressing down the SHIFT button or the RETURN button. You can also press the D. GAMMA button whilst pressing down the SHIFT button on the remote control for the same operation in step 3. (You do not need to do the steps 1 and 2. ) Advanced DVD Features The function control screen appears. 4 E-36 *DV777W_EP36-40 36 12/4/04, 13:50 SYSTEM-Q8H (Z) TINSZA083AWZZ SYSTEM-Q8H ENGLISH Using the function control (continued) H Digital super picture setting Digital super picture is a digital image quality enhancement function that gives a clearer image by sharpening the details and outlines in the image and reducing the amount of picture noise. Perform the following procedure to change the setting between "ON" and "OFF", and the level for the digital super picture setting. H To zoom an image Whilst a disc is playing, press the ZOOM button. ZOOM:1 ZOOM indicator 1 Press the SET UP button whilst pressing down the SHIFT button during playback. The function control screen appears. I Each press of the ZOOM button cycles through the zoom settings as follows: ZOOM: 1 (X 1. 2) ZOOM: 2 (X 1. 5) ZOOM: 3 (X 2. 0) Off. Note that all of the above zoom ratios are approximate only. I Whilst an image is zoomed, you can press the cursor L, M, 1 and 0 button to shift the view and display the part you want. Advanced DVD Features 2 Use the cursor L or M button and then press the to select ENTER button. S DVD 0 G S 0 10 BIT RATE Mbps ON ENTER SELECT ENTER RETURN Press the L button. [. . . ] G Cannot record tracks with proper sound quality. G Cannot remove the tape. Possible cause G Is the erase-protection tab removed?(You cannot record on a metal or CrO2 tape. ) G Is there any slack?G Are the capstans, pinch rollers, or heads dirty? [. . . ]