User manual SHARP SYSTEM-S400H

[. . . ] Micro sistemi SYSTEM-S400H composto da SYSTEM-S400H (apparecchio principale) e CP-HP700H (sistema di diffusori). SYSTEM-S400H micro systeem bestaande uit SYSTEM-S400H (hoofdtoestel) en CPHP700H (luidsprekersysteem). SYSTEM-S400H Sistema de Micro Componente composto de SYSTEM-S400H (unidade principal) e CP-HP700H (sistema de alto-falante). SYSTEM-S400H Micro Component System consisting of SYSTEM-S400H (main unit) and CP-HP700H (speaker system). SYSTEM-S400H BEDIENUNGSANLEITUNG MODE D'EMPLOI MANUAL DE MANEJO BRUKSANVISNING MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING MANUAL DE OPERAO OPERATION MANUAL DEUTSCH FRANAIS ESPAOL SVENSKA ITALIANO NEDERLANDS PORTUGUS ENGLISH Siehe Seiten i bis vi und D-1 bis D-32. [. . . ] Insert the batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them towards the battery terminals. Notes concerning use: " Replace the batteries if the operating distance is reduced or if the operation becomes erratic. Purchase 2 "AA" size batteries (UM/ SUM-3, R6, HP-7 or similar). " Periodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth. " Exposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit. " Keep the remote control away from moisture, heat, shock, and vibrations. SYSTEM-S400H ENGLISH 3 !Test of the remote control Precautions for battery use: " Replace all old batteries with new ones at the same time. " Do not mix old and new batteries. " Remove the batteries if the unit is not to be used for long periods of time. " Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time. !Demonstration mode The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll. To return to the demonstration mode: When the unit is in the power stand-by mode, press the X-BASS/ DEMO button again. Note: When the power is on, the X-BASS/DEMO button can be used to select the extra bass mode. Incorrect Speaker grilles are removable: Make sure nothing comes into contact with the speaker diaphragms when you remove the speaker grilles. Incorrect !Connecting the AC power lead After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. If you plug in the unit first, the unit will enter the demonstration mode. Press the ON/STAND-BY button to turn the power on. After use: Press the ON/STAND-BY button to enter the power stand-by mode. Preparation for Use To cancel the demonstration mode: When the unit is in the power stand-by mode (demonstration mode), press the X-BASS/DEMO button. The unit will enter the low power consumption mode. 8 E-8 02/7/22 SYSTEM-S400H(H)E1. fm SYSTEM-S400H Sound control !Bass control When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and "X-BASS" will appear. To cancel the extra bass mode, press the X-BASS/DEMO (X-BASS) button. [. . . ] Is the unit located near excessive skipped, or stopped in the vibrations?Has condensation formed inside the unit? E-29 02/7/22 SYSTEM-S400H(H)E3. fm SYSTEM-S400H " Remote control Symptom !! " Clearing all the memory (reset) Possible cause Is the AC power lead of the unit plugged in?Does the remote control sensor receive strong light? [. . . ]