User manual SHARP UP-3500

[. . . ] Installation in such locations could cause damage to the cabinet and the electrical components. · The POS terminal should not be operated by an individual with wet hands. The water could seep into the interior of the POS terminal and cause component failure. · Do not apply excessive pressure to the display. [. . . ] The default is the normal-size character mode. When the double-size character mode is selected, the letter "W" appears at the bottom of the display. Editing text You can edit the text you have entered by deleting and/or inserting characters. To select a text editing mode: Use the key. (Editing mode: the insert mode ("_") and the overwrite mode ("s")) To move the cursor: Use the or key. To delete a character or figure: Use the (Delete) or (Back space) key. 132 UP33_07. p65 132 3/22/99, 11:52 AM s Entering character codes Numerals, letters and symbols are programmable by touching the key and character codes. Use the following procedure with the cursor placed at the position where you want to enter characters: XXX XXX: Character code (3 digits) 133 UP33_07. p65 133 3/22/99, 11:52 AM 13 Programming This chapter explains how to program various items. Before you start programming, select the PRICE, PGM1, PGM2, or AUTO KEY mode from the mode selection window depending on the item you are going to program. PRICE MODE PGM1 MODE PGM2 MODE AUTO KEY MODE Basic Instructions This section illustrates the basic programming by using an example of programming for departments. Procedure s Programming example The following example shows how to program 2. 00 for the unit price, "ABCDE" for the description, and the scale entry to be enabled for department 1. 1. In the PGM2 MODE window, select "2 SETTING" by using the or key and touch the key. · The SETTING window will appear. NOTE · You can also select "2 SETTING" simply by touching a corresponding line in the window. · You can also select "2 SETTING" by touching the and keys. · If you return to the previous screen, touch the key. 2. Select "1 ARTICLE. " · The ARTICLE window will appear. NOTE The mark (w) in the lower-right corner of the window shows that the window contains more options than are now on the screen. See "s Recipe table" on page 153. See "s Scale table" on page 154. See "s Department shift" on page 155. See "s Happy hour" on page 155. 136 UP33_07. p65 136 3/22/99, 11:52 AM s Department Your POS terminal is equipped with 10 standard departments. Use the following procedure to program for departments. Program each item as follows: NOTE Procedure Select a pertinent dept. code from the departments list. For more information about the entry patterns, see the "Basic Instructions" section. · PRICE (Use the numeric entry) Unit price (max. (Use the numeric entry) 01-09: Plus department 10: Minus department 11: Plus hash department 12: Minus hash department 15-17: Non-turnover 1-3 · If the "Hash" and "non-turnover" functions are disabled, you are not allowed to select any hash or non-turnover department. · DESCRIPTION (Use the character entry) Description for a department. · KEY DESCRIPTION (Use the character entry) Description of the key label for a department. · KEY COLOR (Use the selective entry) Select a key color from the colors list (16 different colors). [. . . ] (4) Change PGM function "Total and change amount printing -- With foreign/Domestic only". (5) Change PGM function "Exchange1 amount printing for total validation print -- YES/NO" and "Total validation print amount printing -- With foreign/Domestic only". (6) Change PGM function "Exchange1 calculation method -- Division/Multiplication". (7) Set "Domestic currency symbol" as EURO symbol. [. . . ]