User manual SHARP UP-700

[. . . ] POS TERMINAL MODEL UP-700 INSTRUCTION MANUAL CAUTION: The drawer unit should be securely fitted to the supporting platform to avoid instability when the drawers are open. CAUTION: The socket-outlet shall be installed near the equipment and shall be easily accessible. VORSICHT: Die Netzsteckdose mu nahe dem Gert angebracht und leicht zugnglich sein. ATTENTION: La prise de courant murale devra tre installe proximit de l'quipement et devra tre facilement accessible. [. . . ] The "01" window will appear. E C 112 5. On the first page of the "01" window, program the unit price and description as follows: NOTE There are three entry patterns for the programming: the numeric entry, character entry, and selective entry. E C Move the cursor to "PRICE, " enter "200" by using numeric keys, then press the E key. Numeric entry Move the cursor to "DESCRIPTION, " enter "ABCDE" by using character keys, then press the E key. Character entry If you want to clear setting, press the L key before you press the E key. 6. Press the key to go to the next page of the "01" window, then program the machine to set "taxable 2" as follows: Move the cursor to "TAXABLE 2, " press the . key to select "YES, " then press the E key. key toggles between two options as follows: NOYESNO. . . . Pressing the s key displays all pertinent options. 7. Select one of the following actions: To cancel the programming, press the C key. Select "1 YES" in the "ARE YOU SURE ?" window. To finalize the programming, press the c key, then press the C key. You will return to the "DEPT" window. To program for the following department, press the ~ key. To return to the "01" window, press the key. The following sections describe how to program each item which is contained in a programming group. 113 Article Programming Use the following procedure to select any option included in the article programming group: Procedure 1 From the SETTING menu, select "1 ARTICLE. " The ARTICLE window will appear. E C 2. Select any option from the following options list: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 DEPT: PLU/EAN: DYNAMIC EAN: PLU RANGE: PLU STOCK: PLU MENU KEY: COMBO MEAL: LINK PLU TABLE: CONDIMENT TBL. : PROMOTION TBL. : SCALE TABLE: EAN NON-PLU: PRESS CODE: EAN DELETE: Departments PLUs/EANs Dynamic EANs A range of PLUs PLU/EAN stock quantity PLU menu key Combo meal Link PLU table Condiment table Promotion table Scale table EAN Non-PLU type code format EAN press code format EAN record delete period The screen continues. The following illustration shows those options included in the article programming group. 1 ARTICLE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 DEPT PLU/EAN DYNAMIC EAN PLU RANGE PLU STOCK PLU MENU KEY COMBO MEAL LINK PLU TABLE CONDIMENT TBL. SCALE TABLE EAN NON-PLU PRESS CODE EAN DELETE See "Department" on page 115. See "Dynamic EAN" on page 119. See "PLU/EAN stock" on page 120. See "PLU menu key" on page 121. See "Link PLU table" on page 122. See "PLU condiment table" on page 123. See "Promotion table" on page 124. See "Scale table" on page 125. See "EAN Non-PLU code format" on page 126. See "EAN delete" on page 127. 114 s Department Your POS terminal is equipped with 10 standard departments, and can be equipped with a maximum of 99 departments. Use the following procedure to program for departments. [. . . ] Is the print head release lever at the printing position? The display is illuminated, but the whole machine refuses entries. No receipt is issued. No journal paper is taken up. Is the take-up spool installed on the bearing properly? Is the print head release lever at the printing position? Is the paper roll properly installed? Printing is unusual. 15 Options List of Options For your UP-700 POS terminal, the following options are available: For details, contact your authorized SHARP dealer. Do not try to install any options yourself. [. . . ]