User manual SHARP VC-381GS/GB/N/S

[. . . ] (Page 7) When you touch "Exit without save", the software is terminated without saving the data. (Page 8) (3) Move toolbar icon This appears on the side opposite to the toolbar, and can be touched to move the toolbar to that side. You can write letters, draw lines, and paste images here. The board can be displayed in two modes: whiteboard mode and transparent mode. [. . . ] The drawn shape will be determined as an object 1 second* after you lift the touch pen from the board. If you start drawing another object within 1 second* after you lift the touch pen from the board, the drawn shapes will be determined to be a single object even though they are separate. Less than 1 second After 1 second Both shapes are determined as a single object. You can switch through "Pen 1" to "Pen 3" and "Eraser" by repeatedly pressing Function Button 2 of the touch pen. To change functions using Function Button 2, select the touch panel driver "Properties", and set "Function Button 2" to "Pen Software Link" on the "OPERATION SETTING" tab. In certain cases, such as when a button on the toolbar is touched, the drawn shape will be fixed as an object before the specified time elapses after the touch pen is lifted from the board. The "Pen 1" to "Pen 3" palettes can be used to change the pen function settings. To display the palette, touch the button of the selected pen once again. (1) Check this box to make the line translucent. The pen icon changes when this setting is enabled. With the pen touching the screen, move the pen. (Objects which are not entirely included in the area are not selected. You can edit several selected objects as one object. You can move an object by selecting the object and dragging it. The line width remains the same after the object is enlarged/reduced. You can copy an object to the clipboard. You can cut an object and save it to the clipboard. You can change the order of the object placement. Object placement order When several objects overlap, the objects at the back are hidden behind the objects in front. (1) Object placed in front of the other objects (2) Object placed second from the front object (3) Object placed at the back of the other objects Each time you double-click, the view changes in the order 100% > 150% > 200%, centered on the click position. Changing the display position when the view is enlarged To change the display position, drag on the screen with Enlarging the view of the screen with the pan window A thumbnail of the current sheet appears in the pan window on the toolbar. Double-click to change the view in the order 100% > 150% > 200%, centered on the double-click position. [. . . ] You can customize various settings of this software. The settings are the same in both whiteboard mode and transparent mode. However, the contents of the screen will vary depending on which mode is started. (2) Pen/Eraser palette Select this to have the palettes of "Pen 1" to "Pen 3" and "Eraser" close when a pattern is selected from a palette. [. . . ]