User manual SHARP VC-GH61

[. . . ] TINS-A083UMZZCoverGB 11/11/02 11:23 am Page 1 VC-GH611GM VC-GH611GM VC-GH61GM VIDEO CASSETTE RECORDER OPERATION MANUAL G S-VHS PLAYBACK G IGR Hi-Fi G 6 HEAD EXTENDED PLAY G NTSC SIMPLE PLAYBACK G AUTO CLOCK G AUTO TUNING G VPS/PDC G SHARP SUPER PICTURE ® TINS-A083UMZZCoverGB 11/11/02 11:23 am Page 2 Dear SHARP customer Thank you for buying this SHARP VCR. Given proper care, it will provide years of entertainment for the whole family. Please read this operation manual carefully before attempting to operate the VCR. Copyright G Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. [. . . ] will be shown on the display. NOTES: · VPS/PDC is a signal broadcast by some TV stations which adjusts the start and stop time of your VCR recording. This ensures that if there is a change in broadcast time for your programme the VCR will still record the whole programme. It is essential that the start time as it appears in the TV listing is used to program the VCR, as this information is used to identify the VPS/PDC signal corresponding to your programme. If flashes a video tape has not been inserted into the VCR. If the video tape is ejected when the VCR tries to record the record protection tab has been removed. During recording, press STOP (r) to cancel the recording. If there are further recordings to be made, the VCR will return to TIMER STAND-BY. · · · GB-14 TINS-A083UMZZEnglish. book Page 15 Monday, November 11, 2002 9:39 AM BASIC OPERATION HOW TO SET A DELAYED RECORDING CHECKING, CHANGING AND CANCELLING A RECORDING CHECKING A RECORDING MENU SCREEN T I ME R MOD E SE T UP 1. If in TIMER STANDBY mode, press TIMER ON/OFF to exit. 2. · All the delayed recordings in the VCR's memory will be shown. · SET : SE L ECT : ENT ER ME NU : E X I T You can check the settings and change or cancel them. CHANGING A RECORDING 1. Follow steps 1 to 4 of CHECKING A RECORDING. 1/2 DA T E 21 / 06 --/---/---/-P R S T AR T S T OP 02 12 : 00 13 : 00 --:--:---:--:---:--:-SP * ------- 2. If you wish to change a delayed recording, press [K/L] to highlight the recording, then press SET. 3. Press [H/J] to highlight the setting to be changed and correct it by using the [K/L] or the NUMBER BUTTONS. 4. When all corrections are complete press SET, then press MENU. CANCELLING A RECORDING 1/2 DA T E P R S T AR T S T OP 2 1 / 0 6 0 2 1 2 : 0 0 1 3 : 0 0 SP * --/-- --:--:-- ----/-- --:--:-- ----/-- --:--:-- --- 1. Follow steps 1 to 4 of CHECKING A RECORDING. 2. If you wish to cancel a delayed recording, press [K/L] to highlight the recording to be cancelled, then press CLEAR. 3. NOTE: · If there are some programmes to be recorded, do not forget to press TIMER ON/OFF button to return the VCR to TIMER STAND-BY mode. GB-15 TINS-A083UMZZEnglish. book Page 16 Monday, November 11, 2002 9:39 AM ADVANCED OPERATION AUDIO AND YOUR VCR HI-FI STEREO SOUND Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a scart lead, or audio equipment connected with audio phono leads. The VCR is normally set so that stereo sound is possible. The sound output from the VCR is controlled by the AUDIO OUT button on the remote control. If you wish to change the sound output you can use the AUDIO OUT button as follows: · · · · Press AUDIO OUT once. The LEFT audio channel will be sent to BOTH speakers. The RIGHT audio channel will be sent to BOTH speakers. [. . . ] · Make sure the taoe is not at the start. · Make sure the VCR is not in Timer or Menu mode. TAPE TRANSPORT/ MECHANISM Tape can not be loaded. OTHER PROBLEMS Rewind is not possible. Picture does not change even though CHANNEL K/L buttons are pressed. Desired channel position can not be selected. [. . . ]