User manual SHARP VC-M303HM

[. . . ] VC-M303HM VIDEO CASSETTE RECORDER OPERATION MANUAL G 2 HEAD LONG PLAY G CHILD LOCK G SHARP SUPER PICTURE Dear SHARP Customer Thank you for buying this SHARP VCR. Given proper care it will provide years of entertainment for the whole family. Please read this operation manual carefully before attempting to operate the VCR. Copyright G Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. [. . . ] NOTES: · · · If flashes a video tape has not been inserted into the VCR. If the video tape is ejected when the VCR tries to record the record protection tab has been removed. STOP During recording, press STOP to cancel the recording. If there are further recordings to be made, the VCR will return to TIMER STANDBY. If problems persist contact the SHARP Helpline on tel: 0990-274277 14 TIMER ON/OFF button once to place the VCR in TIMER will be shown on BASIC OPERATION HOW TO CHECK, CHANGE AND CANCEL A DELAYED RECORDING Before you start! · If appears on the VCR display, press the TIMER ON/OFF the symbol. STOP TIMER ON/OFF button to remove CHECKING A RECORDING 1. Press [ SET MENU SCREEN T I ME R MOD E SE T UP to switch on the VCR. Press the MENU / button to confirm. ]to select TIMER. Press the SET · All the delayed recordings in the VCR's memory will be shown. SET 4. If the settings are correct press the MENU button to exit. · If you wish to change or cancel any settings, follow the procedures below. : SE L ECT : ENT ER ME NU : E X I T CHANGING A RECORDING 1. Follow steps 1 to 3 of CHECKING A RECORDING. 1/2 DA T E 21 / 06 --/---/---/-P R S T AR T S T OP 02 12 : 00 13 : 00 --:--:---:--:---:--:-SP ---- 2. To change a delayed recording, press [ / ] to highlight the recording, then press SET the SET button to select. 3. Press [ / ] to highlight the setting to be / ] changed and correct it by using the [ or the NUMBER BUTTONS. 4. When all corrections are complete press the SET SET button to confirm, then press the button to exit. 1/2 DA T E P R S T AR T S T OP 2 1 / 0 6 0 2 1 2 : 0 0 1 3 : 0 0 SP --/-- --:--:-- ---/-- --:--:-- ---/-- --:--:-- -- MENU CANCELLING A RECORDING 1. Follow steps 1 to 3 of CHECKING A RECORDING. 2. To cancel a delayed recording, press [ / ] to highlight the recording to be cancelled, then press CLEAR. 3. Press the MENU NOTE: · button to exit. If there are some programmes to be recorded, do not forget to press TIMER ON/OFF TIMER ON/OFF button to return the VCR to TIMER STANDBY mode. If problems persist contact the SHARP Helpline on tel: 0990-274277 15 ADVANCED OPERATION PLAYBACK OF A VIDEO TAPE CHECKING THE AMOUNT OF TAPE REMAINING When you load a video tape into the VCR it can calculate approximately the amount of video tape remaining in hours and minutes. This is useful in determining whether or not there is sufficient tape left to make a recording. When a video tape is playing, the amount of tape remaining is calculated for you automatically. To display the amount of video tape remaining: 1. Press DISPLAY on the remote control as many times as necessary until "R" appears on the VCR display. [. . . ] In the unlikely event of this product requiring repair, please contact the supplier from whom it was purchased. Where this is not possible, please contact the SHARP Helpline on the telephone number given below. This guarantee is offered as an additional benefit to your statutory rights and does not affect these rights in any way. No person has any authority to vary the terms or conditions of this guarantee. [. . . ]