User manual SHARP VC-MH703HM/MH713LM/M303LM

[. . . ] Model shown - VC-MH703HM Model shown - VC-MH303LM VC-MH703HM VC-MH713LM VC-M303LM VIDEO CASSETTE RECORDER OPERATION MANUAL G NICAM Hi-Fi STEREO (VC-MH703HM/VC-MH713LM) G LONG PLAY G CHILD LOCK G SHARP SUPER PICTURE Dear SHARP Customer Thank you for buying this SHARP VCR. Given proper care it will provide years of entertainment for the whole family. Please read this operation manual carefully before attempting to operate the VCR. Copyright G Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. [. . . ] If the settings are correct press MENU to exit. · If you wish to change or cancel any settings, follow the procedures below. : SE L ECT : ENT ER ME NU : E X I T CHANGING A RECORDING 1. Follow steps 1 to 3 of CHECKING A RECORDING. 1/2 DA T E 21 / 06 --/---/---/-P R S T AR T S T OP 02 12 : 00 13 : 00 --:--:---:--:---:--:-SP ---- 2. To change a delayed recording, press [ / ] to highlight the recording, then press SET to select. 3. Press [ / ] to highlight the setting to be changed and correct it by using the [ / or the NUMBER BUTTONS. confirm, then press MENU to exit. ] 4. When all corrections are complete press SET to CANCELLING A RECORDING 1. Follow steps 1 to 3 of CHECKING A RECORDING. 2. To cancel a delayed recording, press [ / ] to highlight the recording to be cancelled, then press CLEAR. 1/2 DA T E P R S T AR T S T OP 2 1 / 0 6 0 2 1 2 : 0 0 1 3 : 0 0 SP --/-- --:--:-- ---/-- --:--:-- ---/-- --:--:-- -- 3. Press MENU to exit. NOTE: · If there are some programmes to be recorded, do not forget to press TIMER ON/OFF button to return the VCR to TIMER STANDBY mode. If problems persist contact the SHARP Helpline on tel: 0990-274277 18 ADVANCED OPERATION AUDIO AND YOUR VCR (VC-MH703HM/VC-MH713LM) HI-FI STEREO SOUND Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a scart lead, or audio equipment connected with audio phono leads. The VCR is normally set so that stereo sound is possible. The sound output from the VCR is controlled by the AUDIO OUT button on the remote control. If you wish to change the sound output you can use the AUDIO OUT button as follows: · Press AUDIO OUT once. The LEFT audio channel will be sent to BOTH speakers. The RIGHT audio channel will be sent to BOTH speakers. The MONO track will be sent to BOTH speakers. L and R will disappear from the VCR display. Pressing AUDIO OUT a fourth time, normal Hi-Fi stereo sound will be heard. L and R will appear on the VCR display. · · · NICAM Hi-Fi STEREO SOUND Your VCR can receive and record NICAM sound. The VCR is normally set so that NICAM sound is possible if it is present on the receiving signal, otherwise the VCR will automatically switch to receive the mono signal. If you wish to do this follow the procedure below: 1. Press MENU to display the main menu on the screen. 2. Press [ / / ] to select MODE. N I CAM CO L OUR AU T O AU T O OF F PAL 3. [. . . ] This guarantee is offered as an additional benefit to your statutory rights and does not affect these rights in any way. 7. No person has any authority to vary the terms or conditions of this guarantee. If you have any difficulty operating this product, or would like information on other SHARP products, please telephone the SHARP Helpline on the number given below. SHARP Helpline: Tel: 0990 274277 Please note that all calls are charged at local rate. In the unlikely event of this equipment requiring repair during the guarantee period, you will need to provide proof of the date of purchase to the repairing company. [. . . ]