User manual SHARP VC-MH711GM

[. . . ] VC-MH711GM VIDEO CASSETTE RECORDER OPERATION MANUAL q LOW POWER FEATURE q CHILD LOCK q SHARP SUPER PICTURE q AUTO TUNING q AUTO CLOCK q 4 HEAD LONG PLAY q IGR Hi-Fi STEREO ® Dear SHARP customer Thank you for buying this SHARP VCR. Given proper care, it will provide years of entertainment for the whole family. Please read this operation manual carefully before attempting to operate the VCR. Copyright q Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. [. . . ] Then press SET to confirm. DA T E P R S T AR T S T OP 21 / 06 02 12 : 00 13 : 00 9 / 0 7D0 3 2 1 : 0 5 -:---/-- --:--:---/-- --:--:-1/2 SP * SP * ----- 9. Enter the stop time, for example for 22:30 stop, press 2 2 3 0. 10. If your VCR has long play facility and you wish to change the RECORDING SPEED, use the [H/J] to highlight SP. Press [K/L] to select standard play (SP) or long play (LP) as required. 1/2 DA T E P R S T AR T S T OP 21 / 06 02 12 : 00 13 : 00 9 / 0 7D0 3 2 1 : 0 5 -:---/-- --:--:---/-- --:--:-SP * LP * ----- 11. For VPS/PDC setting use the [H/J] to highlight the final column. Using the [K/L] will select VPS/PDC ON or OFF ( * = ON - = OFF). 12. Press SET to confirm. · The MENU now shows all the timer settings you have entered. If you wish to make additional timer recordings, repeat this procedure. 1/2 DA T E P R S T AR T S T OP 21 / 06 02 12 : 00 13 : 00 9 / 0 7 D 0 3 2 1 : 0 5 22 : 3 0 --/-- --:--:---/-- --:--:-SP * LP ----- 13. When you have completed entering timer settings, press MENU to remove the menu from the TV screen. 14. Press TIMER ON/OFF once to place the VCR in TIMER STAND-BY mode. will be shown on NOTES: · VPS/PDC is a signal broadcast by some TV stations which adjusts the start and stop time of your VCR recording. This ensures that if there is a change in broadcast time for your programme the VCR will still record the whole programme. It is essential that the start time as it appears in the TV listing is used to program the VCR, as this information is used to identify the VPS/PDC signal corresponding to your programme. If flashes a video tape has not been inserted into the VCR. If the video tape is ejected when the VCR tries to record the record protection tab has been removed. During recording, press STOP (r) to cancel the recording. If there are further recordings to be made, the VCR will return to TIMER STAND-BY. · · · 14 BASIC OPERATION HOW TO SET A DELAYED RECORDING CHECKING, CHANGING AND CANCELLING A RECORDING CHECKING A RECORDING MENU SCREEN T I ME R MOD E SE T UP 1. If in TIMER STANDBY mode, press TIMER ON/OFF to exit. 2. · All the delayed recordings in the VCR's memory will be shown. · SET : SE L ECT : ENT ER ME NU : E X I T You can check the settings and change or cancel them. CHANGING A RECORDING 1. Follow steps 1 to 4 of CHECKING A RECORDING. 1/2 DA T E 21 / 06 --/---/---/-P R S T AR T S T OP 02 12 : 00 13 : 00 --:--:---:--:---:--:-SP * ------- 2. If you wish to change a delayed recording, press [K/L] to highlight the recording, then press SET. 3. [. . . ] · Safety device operating: unplug VCR for 2 hours. · Make sure there is no other tape in the VCR. · Make sure you are loading the tape correctly. VCR cannot be operated · Remote control is too far away from the main unit. [. . . ]