User manual SHARP VC-496GB

[. . . ] In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 5A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: · The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. [. . . ] You can set various channels as favourites so that only the favourite channels are navigated. You can select a broadcast type option from the list by using " " /" " and OK buttons. If the name and time of the programme are not available, then information banner will be displayed with blanks. If the selected channel is locked, you must enter the correct four-digit numeric code to view the channel (default code is 0000). If the USB stick is not recognized after power off/on or First Time Installation, first, plug the USB device out and power off/on the TV set. To display Media Browser window, press either "MENU" button on the remote control and then select Media Browser by pressing " " or " " button. To display specific types of broadcast, you should use Active channel list setting. Select Active channel list from the Channel list menu by using " " or " " button. You can play music, picture and video files from the connected USB memory stick. When you select Videos from the main options, available video files will be filtered and listed on this screen. You can use " " or " " button to select a video file and press OK button to play a video. You can set your Media Browser preferences by using the Settings dialog. DivX® Registration Code: Some DivX® Video-OnDemand files require registration code, this code can be used for this purpose. Record OSD will then be displayed for a short time and the current event will be recorded. ⷠYou can press (RECORD) button on the remote control again to record the next event on the EPG. IMPORTANT: To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available. Press (PLAY) button again to watch the paused programme from the stopped moment. You will see the timeshift gap between the real and the timeshifted programme in the info bar. When the timeshift is reached, timeshifting mode will be quitted and you will switch back to watching normal broadcast. (*) Continuous time shift recording's duration depends on your connected USB disk's file size and defined Max. [. . . ] If you forget your password please contact technical service. Wrong OSD language The language for the sound or subtitles on a DVD cannot be changed. ⷠMultilingual sound and/or subtitles not recorded on the DVD. ⷠTry to change the sound or subtitles using DVD's title menu. [. . . ]