User manual SHARP VC-783S

[. . . ] 5 Auto installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 BASIC OPERATION Important notes on your VCR and video tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 How to playback a video tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3D DNR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If there are further recordings to be made, the VCR will return to TIMER STAND-BY. · · · GB-17 BASIC OPERATION HOW TO SET A DELAYED RECORDING CHECKING, CHANGING AND CANCELLING A RECORDING CHECKING A RECORDING MENU SCREEN T I ME R MOD E SE T UP 1. If in TIMER STANDBY mode, press TIMER ON/ OFF to exit. 2. · · All the delayed recordings in the VCR's memory will be shown. You can check the settings and change or cancel them. SET : SE L ECT : ENT ER ME NU : E X I T CHANGING A RECORDING 1. Follow steps 1 to 4 of CHECKING A RECORDING. 1/2 DA T E 21 / 06 --/---/---/-P R S T AR T S T OP 02 12 : 00 13 : 00 --:--:---:--:---:--:-SP * ------- 2. If you wish to change a delayed recording, press [ / ] to highlight the recording, then press SET. 3. Press [ / ] to highlight the setting to be changed and correct it by using the[ / or the NUMBER BUTTONS. When all corrections are complete press SET, CANCELLING A RECORDING 1. Follow steps 1 to 4 of CHECKING A RECORDING. 2. If you wish to cancel a delayed recording, press [ / ] to highlight the recording to be cancelled, then press CLEAR. 1/2 DA T E P R S T AR T S T OP 2 1 / 0 6 0 2 1 2 : 0 0 1 3 : 0 0 SP * --/-- --:--:-- ----/-- --:--:-- ----/-- --:--:-- --- 3. Press MENU. NOTE: · If there are some programmes to be recorded, do not forget to press TIMER ON/OFF button to return the VCR to TIMER STAND-BY mode. GB-18 ADVANCED OPERATION AUDIO AND YOUR VCR HI-FI STEREO SOUND Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a scart lead, or audio equipment connected with audio phono leads. Your VCR can receive and record a Dolby Pro Logic soundtrack and replay as a Virtual Dolby Surround sound via your TV stereo speakers. Audio Modes Press SURROUND on the remote control to select between the surround modes. AUDIO OUTPUT SETTING L and R on SURROUND MODE Virtual Dolby Off AUDIO OUTPUT Surround sound off Normal Hi-Fi sound only Virtual Dolby Surround ON. Virtual Dolby On Surround effect for tapes and broadcasts encoded with Dolby Surround. Surround effect for tapes and broadcasts not encoded with Dolby Surround. Surround On NOTES: · · If you have a television with a Pro Logic decoder or a external Pro Logic decoder ensure your VCR is in Virtual Dolby Off mode for best results. Ensure your VCR is connected to the television via a SCART lead. GB-21 ADVANCED OPERATION AUDIO DUBBING RECORDING SOUND ON TO A VIDEO TAPE (AUDIO DUBBING) This feature enables you to add narration or background music to a pre-recorded tape. · The audio signal will be recorded on the mono track. The Hi-Fi track will remain unchanged: Connect your audio equipment to AUDIO IN L-R terminals on the front of your VCR. If a microphone is to be used, connect it to your audio equipment. + AUDIO SOURCE 1. Connect the audio source to the AUDIO IN L-R terminals on the front of the VCR as shown above. 2. Insert the pre-recorded tape into the VCR. 3. Press PLAY/X2 ( recording. ) to view the 4. If you wish to listen to the original Hi-Fi track while you are recording the new dubbed audio track you will need to set AUDIO MIX to ON in the MODE menu. II A. Press PAUSE/STILL ( ) when you reach the point on the tape where you want audio dubbing to start. SP 6. [. . . ] · Programme may not carry stereo. Tape is automatically · The record-protection tab has been ejected when removed. pressing REC ( ) or TIMER ON/OFF buttons. SHOWVIEW does not record desired programme. · Broadcast does not carry VPS/PDC signal which alters recording time. [. . . ]