User manual SHARP VCM311AHM OPERATION MANUAL

[. . . ] VC-M311AHM VIDEO CASSETTE RECORDER OPERATION MANUAL q LOW POWER FEATURE q CHILD LOCK q SHARP SUPER PICTURE Dear SHARP Customer Thank you for buying this SHARP VCR. Given proper care it will provide years of entertainment for the whole family. Please read this operation manual carefully before attempting to operate the VCR. Copyright Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. [. . . ] Enter two digits for the day, then two for the month. For example for July 9th, press 0 9 (9th), then 0 7 (July). 5. Then press SET to confirm. If you want to make additional recordings at the same time each day or week, use [ / ] to select D (daily) or W (weekly). Enter the channel using the [ / ] or NUMBER BUTTONS. For example to record a programme on channel 3, press 0 3. Then press SET to confirm. DA T E 21 / 06 9 / 07 - -/- - -/- - 1/2 P R S T AR T S T OP 02 12 : 00 1 3 : 00 S P -:---:----:---:----:---:---- 1/2 P R S T AR T S T OP DA T E 21 / 06 02 12 : 00 1 3 : 00 S P -:-9 / 0 7D - - : - - SP -:-- -/- - - -:----:-- -/- - - -:---- 13 BASIC OPERATION HOW TO SET A DELAYED RECORDING 8. Enter the start time using the [ /] or NUMBER BUTTONS - hours first then minutes (when entering less than 10 minutes add a '0' before the number), for example for 21:05 start, press 2 1 0 5. Enter the stop time, for example for 22:30 stop, press 2 2 3 0. If your VCR has long play facility and you wish to change the RECORDING SPEED, use the [ / ] to highlight SP. Press [ / ] to select standard play or long play as required. Press SET to confirm. q 1/2 P R S T AR T S T OP DA T E 21 / 06 02 12 : 00 1 3 : 00 S P 9 / 0 7 D0 3 2 1 : 0 5 - : - - SP -:----:-- -/- - - -:----:-- -/- - - - 1/2 P R S T AR T S T OP DA T E 21 / 06 02 12 : 00 1 3 : 00 S P 9 / 0 7 D0 3 2 1 : 0 5 2 2 : 3 0 L P -:--:---- -/- - - -:--:---- -/- - - - The MENU now shows all the timer settings you have entered. If you wish to make additional timer recordings, repeat this procedure. 1/2 P R S T AR T S T OP DA T E 21 / 06 02 12 : 00 1 3 : 00 S P 9 / 0 7 D0 3 2 1 : 0 5 2 2 : 3 0 L P -:--:---- -/- - - -:--:---- -/- - - - 12. When you have completed entering timer settings, press MENU to remove the menu from the TV screen. Press TIMER ON-OFF once to place the VCR in TIMER STAND-BY mode. will be shown on the display. NOTES: flashes a video tape has not been inserted into the VCR. the video tape is ejected when the VCR tries to record the record protection tab has been removed. q During recording, press STOP ( ) to cancel the recording. If there are further recordings to be made, the VCR will return to TIMER STANDBY. q If q If 14 BASIC OPERATION HOW TO SET A DELAYED RECORDING CHECKING, CHANGING AND CANCELLING A RECORDING CHECKING A RECORDING 1. If in TIMER STANDBY mode, press TIMER ON/OFF to exit. Press SET to confirm. q MENU SCREEN TIMER MODE SET UP v w :SELECT SET :ENTER MENU :EXIT q All the delayed recordings in the VCRs memory will be shown. You can check the settings and change or cancel them. CHANGING A RECORDING 1. Follow steps 1 to 4 of CHECKING A RECORDING. If you wish to change a delayed recording, press [ / ] to highlight the recording, then press SET. [. . . ] Safety device operating: unplug VCR for 2 hours. Tape cannot be loaded. q q Make sure there is no other tape in the VCR. Make sure you are loading the tape correctly. Remote control is too far away from the main unit. Batteries have not been inserted correctly. [. . . ]