User manual SHARP VCM311HM OPERATION MANUAL

[. . . ] VC-MH711HM/LM 3/2/99 2:09 pm Page 1 VC-MH711HM VC-MH711HM VC-MH711LM VIDEO CASSETTE RECORDER OPERATION MANUAL q 4 HEAD LONG PLAY q SHARP SUPER PICTURE q LOW POWER FEATURE q CHILD LOCK VC-MH711HM/LM 3/2/99 2:09 pm Page 2 Dear SHARP Customer Thank you for buying this SHARP VCR. Given proper care it will provide years of entertainment for the whole family. Please read this operation manual carefully before attempting to operate the VCR. Copyright Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. [. . . ] q During recording, press STOP ( ) to cancel the recording. If there are further recordings to be made, the VCR will return to TIMER STANDBY. 14 VC-MH711HM/LM 3/2/99 2:10 pm Page 19 BASIC OPERATION HOW TO SET A DELAYED RECORDING CHECKING, CHANGING AND CANCELLING A RECORDING CHECKING A RECORDING 1. If in TIMER STANDBY mode, press TIMER ON/OFF to exit. Press SET to confirm. q MENU SCREEN TIMER MODE SET UP v w :SELECT SET :ENTER MENU :EXIT q All the delayed recordings in the VCR's memory will be shown. You can check the settings and change or cancel them. CHANGING A RECORDING 1. Follow steps 1 to 4 of CHECKING A RECORDING. If you wish to change a delayed / ] to highlight recording, press [ the recording, then press SET. Press [ / ] to highlight the setting to be changed and correct it by using the [ / ] or the NUMBER BUTTONS. When all corrections are complete press SET, then press MENU. Follow steps 1 to 4 of CHECKING A RECORDING. If you wish to cancel a delayed recording, press [ / ] to highlight the recording to be cancelled, then press CLEAR. NOTE: q DA T E 21 / 06 - -/- - -/- - -/- - 1/2 P R S T AR T S T OP 02 12 : 00 1 3 : 00 S P --:----:---:----:---:----:-- DA T E 21 / 06 - -/- - -/- - -/- - 1/2 P R S T AR T S T OP 02 12 : 00 1 3 : 00 S P -:---:----:---:----:---:---- If there are some programmes to be recorded, do not forget to press TIMER ON-OFF button to return the VCR to TIMER STAND-BY mode. 15 VC-MH711HM/LM 3/2/99 2:10 pm Page 20 ADVANCED OPERATION AUDIO AND YOUR VCR (HiFi VCR'S Only) HI-FI STEREO SOUND Stereo sound is possible from Hi-Fi VCR's if you have a stereo TV connected to the VCR with a scart lead, or audio equipment connected with audio phono leads. The VCR is normally set so that stereo sound is possible. The sound output from the VCR is controlled by the AUDIO OUT button on the remote control. If you wish to change the sound output you can use the AUDIO OUT button as follows: q q q q Press AUDIO OUT once. The LEFT audio channel will be sent to BOTH speakers. The RIGHT audio channel will be sent to BOTH speakers. The MONO track will be sent to BOTH speakers. L and R will disappear from the VCR display. Pressing AUDIO OUT a fourth time, normal Hi-Fi stereo sound will be heard. L and R will appear on the VCR display. NICAM Hi-Fi STEREO SOUND Your VCR can receive and record NICAM sound. [. . . ] Playback/recording does not playback in stereo. VIDEOPLUS does not record desired programme. q q q Ensure VCR is connected to a stereo TV with SCART lead. Ensure date and time are correctly set on the VCR. q 31 VC-MH711HM/LM 3/2/99 2:10 pm Page 36 GUARANTEE SHARP Electronics (UK) Ltd (hereafter called Sharp) guarantee to provide for the repair, or at its option the replacement, of this product subject to the conditions listed below: 1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does not cover faults or damage by accident, misuse, fair wear and tear, neglect, tampering with the product, or repair other than by a Service Facility appointed by SHARP. [. . . ]