User manual SHARP VCM332HM OPERATION MANUAL

[. . . ] 332hmcover 14/6/99 1:43 pm Page 1 VC-M332HM VC-M332HM VIDEO CASSETTE RECORDER OPERATION MANUAL q NEXT VIEW LINK q PDC q 16:9 PLAYBACK/RECORDING q AUTO HEAD CLEANER q SATELLITE/CABLE BOX CONTROL q NTSC SIMPLE PLAYBACK q LOW POWER FEATURE q CHILD LOCK q SHARP SUPER PICTURE q POST CODE SECURITY q AUTO SORTING & CLOCK SET 332hmcover 14/6/99 1:43 pm Page 2 Dear SHARP Customer Thank you for buying this SHARP VCR. Given proper care it will provide years of entertainment for the whole family. Please read this operation manual carefully before attempting to operate the VCR. Copyright q Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. [. . . ] Press SET to confirm. · The MENU now shows all the timer settings you have entered. If you wish to make additional timer recordings, repeat this procedure. settings, press MENU to remove the menu from the TV screen. 1/2 DA T E P R S T AR T S T OP 21 / 06 02 12 : 00 13 : 00 9 / 0 7 D 0 3 2 1 : 0 5 22 : 3 0 --/-- --:--:---/-- --:--:-SP * LP ----- 13. When you have completed entering timer 14. Press TIMER ON/OFF once to place the VCR in TIMER STAND-BY mode. will be shown on NOTES: · VPS/PDC is a signal broadcast by some TV stations which adjusts the start and stop time of your VCR recording. This ensures that if there is a change in broadcast time for your programme the VCR will still record the whole programme. It is essential that the start time as it appears in the TV listing is used to program the VCR, as this information is used to identify the VPS/PDC signal corresponding to your programme. If flashes a video tape has not been inserted into the VCR. If the video tape is ejected when the VCR tries to record the record protection tab has been removed. During recording, press STOP ( ) to cancel the recording. If there are further recordings to be made, the VCR will return to TIMER STANDBY. · · · If problems persist contact the SHARP Customer Helpline on tel: 0990-274277 GB-19 332. book Page 20 Monday, June 14, 1999 12:24 PM BASIC OPERATION HOW TO SET A DELAYED RECORDING CHECKING, CHANGING AND CANCELLING A RECORDING CHECKING A RECORDING MENU SCREEN T I ME R MOD E SE T UP 1. If in TIMER STANDBY mode, press TIMER ON/OFF to exit. 2. Press SET to confirm · · All the delayed recordings in the VCRs memory will be shown. You can check the settings and change or cancel them. SET : SE L ECT : ENT ER ME NU : E X I T CHANGING A RECORDING 1. Follow steps 1 to 4 of CHECKING A RECORDING. 1/2 DA T E 21 / 06 --/---/---/-P R S T AR T S T OP 02 12 : 00 13 : 00 --:--:---:--:---:--:-SP * ------- 2. If you wish to change a delayed recording, press [ / ] to highlight the recording, then press SET. 3. Press [ / ] to highlight the setting to be changed and correct it by using the[ / or the NUMBER BUTTONS. ] 4. When all corrections are complete press SET, then press MENU. CANCELLING A RECORDING 1. Follow steps 1 to 4 of CHECKING A RECORDING. 2. If you wish to cancel a delayed recording, press [ / ] to highlight the recording to be cancelled, then press CLEAR. 1/2 DA T E P R S T AR T S T OP 2 1 / 0 6 0 2 1 2 : 0 0 1 3 : 0 0 SP * --/-- --:--:-- ----/-- --:--:-- ----/-- --:--:-- --- 3. Press MENU. NOTE: · If there are some programmes to be recorded, do not forget to press TIMER ON/OFF button to return the VCR to TIMER STAND-BY mode. If problems persist contact the SHARP Customer Helpline on tel: 0990-274277 GB-20 332. book Page 21 Monday, June 14, 1999 12:24 PM ADVANCED OPERATION INSTALLATION OF A SKY DIGIBOX RECEIVER 1. [. . . ] You wish to re-arrange the channel order. You wish to change the time on the clock or if the VCR could not set the time. All the programmes should now be correctly tuned in and the clock set. If problems persist contact the SHARP Customer Helpline on tel: 0990-274277 GB-47 Module 25A. fm Page 48 Wednesday, June 16, 1999 12:05 PM GUARANTEE SHARP Electronics (UK) Ltd (hereafter called Sharp) guarantee to provide for the repair, or at its option the replacement, of this product subject to the conditions listed below: 1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does not cover faults or damage by accident, misuse, fair wear and tear, neglect, tampering with the product, or repair other than by a Service Facility appointed by SHARP. 2. [. . . ]