User manual SHARP VCMH711HM OPERATION MANUAL

[. . . ] VC-MH711AHM VIDEO CASSETTE RECORDER OPERATION MANUAL q LOW POWER FEATURE q CHILD LOCK q SHARP SUPER PICTURE q POST CODE SECURITY q NICAM Hi-Fi STEREO q AUTO TUNING q AUTO CLOCK Dear SHARP Customer Thank you for buying this SHARP VCR. Given proper care it will provide years of entertainment for the whole family. Please read this operation manual carefully before attempting to operate the VCR. Copyright Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. [. . . ] Follow steps 1 to 4 of CHECKING A RECORDING. If you wish to change a delayed recording, press [ ] to highlight the recording, then press SET. Press [ ] to highlight the setting to be changed and correct it by using the [ ] or the NUMBER BUTTONS. When all corrections are complete press SET, then press MENU. Follow steps 1 to 4 of CHECKING A RECORDING. If you wish to cancel a delayed recording, press [ ] to highlight the recording to be cancelled, then press CLEAR. NOTE: q MENU SCREEN TIMER MODE SET UP v w :SELECT SET :ENTER MENU :EXIT DA T E 21 / 06 - -/- - -/- - -/- - 1/2 P R S T AR T S T OP 02 12 : 00 1 3 : 00 S P --:----:---:----:---:----:-- DA T E 21 / 06 - -/- - -/- - -/- - 1/2 P R S T AR T S T OP 02 12 : 00 1 3 : 00 S P -:---:----:---:----:---:---- If there are some programmes to be recorded, do not forget to press TIMER ON/OFF button to return the VCR to TIMER STAND-BY mode. 15 ADVANCED OPERATION AUDIO AND YOUR VCR HI-FI STEREO SOUND Stereo sound is possible from Hi-Fi VCR's if you have a stereo TV connected to the VCR with a scart lead, or audio equipment connected with audio phono leads. The VCR is normally set so that stereo sound is possible. The sound output from the VCR is controlled by the AUDIO OUT button on the remote control. If you wish to change the sound output you can use the AUDIO OUT button as follows: q q q q Press AUDIO OUT once. The LEFT audio channel will be sent to BOTH speakers. The RIGHT audio channel will be sent to BOTH speakers. The MONO track will be sent to BOTH speakers. L and R will disappear from the VCR display. Pressing AUDIO OUT a fourth time, normal Hi-Fi stereo sound will be heard. L and R will appear on the VCR display. NICAM Hi-Fi STEREO SOUND Your VCR can receive and record NICAM sound. The VCR is normally set so that NICAM sound is possible if it is present on the receiving signal, otherwise the VCR will automatically switch to receive the mono signal. If you wish to do this follow the procedure below: 1. Press MENU to display the main menu on the screen. 5. Press SET to return to the menu screen. 6. Press MENU to exit to normal screen. ¨ NICAM COLOUR AUTO AUTO OFF PAL NOTES: q If the tape being played back does not carry sound recorded on Hi-Fi tracks, L and R will not appear on the display. q If the sound contains `crackling' or `popping' noises the sound quality may be improved by adjusting the tracking using CHANNEL / . q If the poor quality is for a long period the VCR will automatically select the mono track and the sound will be in mono. [. . . ] Playback/recording does not playback in stereo. VIDEOPLUS does not record desired programme. q q q Ensure VCR is connected to a stereo TV with SCART lead. Ensure date and time are correctly set on the VCR. q 33 GUARANTEE SHARP Electronics (UK) Ltd (hereafter called Sharp) guarantee to provide for the repair, or at its option the replacement, of this product subject to the conditions listed below: 1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does not cover faults or damage by accident, misuse, fair wear and tear, neglect, tampering with the product, or repair other than by a Service Facility appointed by SHARP. [. . . ]