User manual SHARP VCMH722HM OPERATION MANUAL

[. . . ] VC-MH722HM cover 11/5/99 1:59 pm Page 1 VC-MH722HM VC-MH722HM VC-MH722LM VIDEO CASSETTE RECORDER OPERATION MANUAL q VPS/PDC q AUTO SORTING & CLOCK SET q NICAM/HIFI STEREO q LOW POWER FEATURE q CHILD LOCK q SHARP SUPER PICTURE q POST CODE SECURITY q NTSC SIMPLE PLAYBACK VC-MH722HM cover 11/5/99 1:59 pm Page 2 Dear SHARP Customer Thank you for buying this SHARP VCR. Given proper care it will provide years of entertainment for the whole family. Please read this operation manual carefully before attempting to operate the VCR. Copyright Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. [. . . ] If you wish to change a delayed recording, press [ / ] to highlight the recording, then press SET. 3. Press [ / ] to highlight the setting to be changed and correct it by using the[ / or the NUMBER BUTTONS. ] 4. When all corrections are complete press SET, then press MENU. CANCELLING A RECORDING 1. Follow steps 1 to 4 of CHECKING A RECORDING. 2. If you wish to cancel a delayed recording, press [ / ] to highlight the recording to be cancelled, then press CLEAR. 1/2 DA T E P R S T AR T S T OP 2 1 / 0 6 0 2 1 2 : 0 0 1 3 : 0 0 SP * --/-- --:--:-- ----/-- --:--:-- ----/-- --:--:-- --- 3. Press MENU. NOTE: · If there are some programmes to be recorded, do not forget to press TIMER ON/OFF button to return the VCR to TIMER STAND-BY mode. If problems persist contact the SHARP Customer Helpline on tel: 0990-274277 GB-16 VC-MH722HM/LM. book Page 17 Monday, April 19, 1999 12:23 PM ADVANCED OPERATION AUDIO AND YOUR VCR HI-FI STEREO SOUND Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a scart lead, or audio equipment connected with audio phono leads. The VCR is normally set so that stereo sound is possible. The sound output from the VCR is controlled by the AUDIO OUT button on the remote control. If you wish to change the sound output you can use the AUDIO OUT button as follows: · · · · Press AUDIO OUT once. The LEFT audio channel will be sent to BOTH speakers. The RIGHT audio channel will be sent to BOTH speakers. The MONO track will be sent to BOTH speakers. L and R will disappear from the VCR display. Pressing AUDIO OUT a fourth time, normal Hi-Fi stereo sound will be heard. L and R will appear on the VCR display. NICAM Hi-Fi STEREO SOUND Your VCR can receive and record NICAM sound. The VCR is normally set so that NICAM sound is possible if it is present on the receiving signal, otherwise the VCR will automatically switch to receive the mono signal. If you wish to do this follow the procedure below: 1. Press MENU to display the main menu on the screen. 2. 6. Press [ Press [ / ] to select MODE. ¨N I CAM AU T O CO L OUR AU T O OF F PAL Press SET. NICAM will be selected. / ] to select OFF. Press SET, to return to the menu screen. Press MENU, to exit to normal screen. NOTES: · · · · If the tape being played back does not carry sound recorded on Hi-Fi tracks, L and R will not appear on the display. lf the sound contains `crackling' or `popping' noises the sound quality may be improved by adjusting the tracking using CHANNEL / . [. . . ] You wish to re-arrange the channel order. You wish to change the time on the clock or if the VCR could not set the time. All the programmes should now be correctly tuned in and the clock set. If problems persist contact the SHARP Customer Helpline on tel: 0990-274277 GB-37 VC-MH722HM/LM. book Page 38 Monday, April 19, 1999 12:23 PM GUARANTEE SHARP Electronics (UK) Ltd (hereafter called Sharp) guarantee to provide for the repair, or at its option the replacement, of this product subject to the conditions listed below: 1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does not cover faults or damage by accident, misuse, fair wear and tear, neglect, tampering with the product, or repair other than by a Service Facility appointed by SHARP. 2. [. . . ]