User manual SHARP VL-NZ100S

[. . . ] SVENSKA VIDEOKAMERA MED FLYTANDE KRISTALLSKRM CAMCORDER COM VISOR DE CRISTAL LQUIDO LIQUID CRYSTAL DISPLAY CAMCORDER VL-NZ100S PORTUGUS ENGLISH BRUKSANVISNING MANUAL DE OPERAO OPERATION MANUAL Before using the camcorder, please read this operation manual carefully, especially page vii. OPERATION MANUAL WARNING ENGLISH TO PREVENT SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This equipment should be used with the recommended AC adapter or battery pack. CAUTION To prevent electric shocks and fire hazards, do NOT use any other power source. Important: Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. Please refer to relevant laws in your country. CAUTION To prevent shock, do not open the cabinet. [. . . ] Press m on the Operation button at the point where the desired image appears. A still picture of the image is displayed. During playback in TAPE-VCR mode, press the GAMMA/BRIGHTER button once. "GAMMA1" appears, and the picture becomes brighter. GAMMA 1 A UD I O 1 + 2 Useful Features A UD I O 1 + 2 Note: To cancel the still picture, press m again. 4 To obtain a brighter picture, press the GAMMA/ BRIGHTER button again. "GAMMA2" appears. GAMMA 2 A UD I O 1 + 2 Press the STILL button to copy the image to the card. The S indicator flashes red while the image is copied. CARD A UD I O 1 + 2 To cancel Gamma Playback Press the GAMMA/BRIGHTER button until "GAMMA1" and "GAMMA2" disappear. Note: Gamma Playback has no effect during still playback. 40 Useful Features Playback Picture Effect Playback Available modes: TAPE-VCR, CARD-VCR 4 Press l or m to select the desired picture effect, then press the SET button. P I C. E F F E C T B W These picture effects let you play back images with a more dramatic effect. 5 Press the MENU button to turn off the menu screen. Types B/W: The picture is displayed in black-andwhite. SEPIA: The picture is displayed in sepia colour similar to that of an old photograph. SOLARI: The contrast of the subject is enhanced, creating a unique artistic image. NEGA: The blacks and whites of the image are reversed and colours of the image are inverted. BLUE: The picture is displayed with the effect of playback through a blue filter. The example screens shown are for TAPE-VCR mode. To cancel Picture Effect Playback Select "OFF" in step 4 above. Notes: Images in Picture Effect Playback mode cannot be transferred via DV cable to a personal computer. You cannot use Picture Effect Playback with Slide Show Playback. Useful Features 1 2 3 During playback in TAPE-VCR (or CARD-VCR) mode, press the MENU button until the menu screen appears. Press l or m on the operation button to select V (or S), then press the SET button. EFFECT", then press the SET button. P L AY BACK SE T P I C. E F F E C T A U D I O DU B AUD I O ANL G DGT L R E T U RN OF F BW SEP I A SOL AR I NE GA BLUE 41 Advanced Features Camera Recording Manual Focus Available modes: TAPE-CAMERA, CARD-CAMERA 1 In TAPE-CAMERA or CARD-CAMERA mode, press the MANUAL button until the focus setting screen appears. Auto Focus may not be able to focus on the subject in the situations shown below. In such situations, set the camcorder to Manual Focus mode and focus manually. AUTO MAN . F O C U S AUTO 2 3 Adjust the Power Zoom control to frame the subject as you desire. Press m or l to focus on the subject. m: To focus on a more distant subject l: To focus on a closer subject Subject is too dark. Lack of contrast, e. g. F O C U S MAN U A L Fast-moving subject. Background is too bright. 4 Press the MANUAL button until the normal screen appears. "MF" appears. Subject has horizontal stripes. Subject is being shot through a dirty or wet window. MF 3 0 min Manual focus indicator Light reflects off the subject. Two subjects at different distances overlap in the same scene. To return to Auto Focus mode Advanced Features Press the SET button while the focus setting screen is displayed. Notes: The camcorder may not be able to focus correctly if the subject is closer than approximately 1. 5 m. Set the zoom control to wide angle, and try refocusing again. If the lens is dirty or fogged, the camcorder may not be able to focus correctly. When "MF" is displayed, you can manually adjust the focus by pressing l or m, even if the focus setting screen is not displayed. Subject has fine, repeated patterns. Subjects at different distances appear in the centre of the scene at the same time. Fast-speed shutter being used under fluorescent lighting. 42 Advanced Features Camera Recording Manual Exposure Available modes: TAPE-CAMERA, CARD-CAMERA To return to Auto Exposure mode Press the SET button while the exposure setting screen is displayed. Note: Manual Exposure mode will cancel if a scene setting is selected thereafter. The camcorder is preset to Auto Exposure mode, which automatically selects the optimal aperture. However, when there is too much contrast in brightness between the subject and background, you may not be able to record a clear image. In this case, use the manual exposure function to correct the exposure level. Background is too bright and subject too dark (backlit subject). Increase the exposure level to allow more light through the lens. Subject is too bright against background. Decrease the exposure level to allow less light through the lens. Advanced Features 1 In TAPE-CAMERA or CARD-CAMERA mode, press the MANUAL button until the exposure setting screen appears. AUTO E X POSURE AUTO 2 Press l or m to select the desired exposure level. The number shown is the selected exposure level. The adjustment range is from +5 (least light) to L5 (most light). MA N U A L E X POSURE +2 Exposure level 3 Press the MANUAL button until the normal screen appears. 43 White Balance Lock Available modes: TAPE-CAMERA, CARD-CAMERA To return to Auto White Balance mode Press the SET button while the white balance setting screen is displayed. Note: White Balance setting will cancel if a scene setting is selected thereafter. The colour of the subject on the screen looks different depending on lighting conditions. Lock the White Balance if the Auto White Balance does not work properly. 1 In TAPE-CAMERA or CARD-CAMERA mode, press the MANUAL button until the white balance setting screen appears. Setting the Camcorder to Full Auto Mode To easily record good-quality images, perform camera shooting in Full Auto mode. [. . . ] No image appears on connected TV screen. Camcorder is in Demo mode. VCR mode Video input channel on TV or TV channel is not selected properly. Audio/video cable is not properly connected. No image from an external source appears on the camcorder screen. DV cable or audio/video cable is not properly connected. Appendix 78 Appendix Symptom Possible cause Suggested solution Rewind or fast forward tape to desired point (p. Call for service or use a commercially available cleaning tape (p. 68). VCR mode Cannot rewind or fast for- Position at beginning or end of tape. [. . . ]