User manual SHARP VL-C8000S

[. . . ] Power supply: This unit can be operated by connecting it to either the AC adapter or battery pack. NOTE The LCD panel of this camcorder is a very high technology product with more than 215, 000 thin-film transistors*, giving you fine picture detail. Occasionally, a pixel may appear on the screen as a fixed point of blue, green, red, or black. Please note that this does not affect the performance of your camcorder. [. . . ] The frame advance function allows you to play back still images frame by frame. Each time you press the button, the picture advances one frame forward (or backward). The reverse playback function allows you to play back images in reverse. The sound is off during reverse, slow, and frame advance playback. â· If you use the slow or frame advance function with the tape recorded in LP mode, the picture may advance several frames at a time. The camcorder automatically returns to normal playback if it is left in reverse playback for more than 30 minutes. Follow the procedure below to select the date, or both the date and time, of recording display on the screen. You can display the date and time during both recording and playback. â· The example screens shown are for Tape Playback mode. The date (or date and time) appears when the on-screen indicators are turned on. â· Before recording, make sure that the date and time have been correctly set. Two subjects at different distances overlap in the same scene. Subject has fine, repeated Subjects at different distances appear in the centre of the scene patterns. "MF" appears when the on-screen indicators are turned on. When "MF" is displayed, you can manually adjust the focus by pressing l or m, even if the focus setting screen is not displayed. You can set Manual Focus mode to Auto Focus mode with the operation below. â· The example screens shown are for Tape Camera mode. You can manually adjust these settings as shown below in the manual setting screen. The example screens shown are for Tape Camera mode. Items that are not selectable are greyed out. White paper or white cloth The colour of the subject on the screen looks different depending on lighting conditions. Lock the White Balance if the Auto White Balance does not work properly. [. . . ] Wait for 2 seconds, then reinstall battery pack and turn on power (pp. Power suddenly turns Camcorder left in Recording off. Subject has little contrast in brightness, or is full of horizontal or vertical stripes. Occurs when shooting subject with strong contrast to the background. [. . . ]