User manual SHARP VL-E31H OPERATION MANUAL

[. . . ] Dette udstyr overholder kravene i direktiv nr. Quest' apparecchio conforme ai requisiti delle direttive 89/336/EEC e 73/23/EEC, come emendata dalla direttiva 93/68/EEC. , , ͷ<ٷ ifi ٷflٷ fi , , Eiҷfi E 89/336/EOK ͷ 73/23/EOK, ͷfl ifl iͷ , , fl 93/68/EOK. Este equipamento obedece s exigncias das directivas 89/336/CEE e 73/23/CEE, na sua verso corrigida pela directiva 93/68/CEE. [. . . ] The picture quality in Still Recording Effects mode will be slightly lower than normal pictures. In TAPE-CAMERA mode, select the desired still recording mode (see page 39). 4 Press d or y (1) to select "SNAP EFF. ", then press r (2). CAMERA SE T PHOTO SNAP SNAP E F F. DG T L ZOOM T AP E SP E ED 16 : 9 OF F PHOTO SHOT P- I N- P 9 F RAMES 1 6 F RAMES 5 Press d or y to select the desired still recording effect, then press e. SNAP E F F. PHOTO SHO T 6 Press the MENU/DISPLAY button to turn off the menu screen. 40 Useful Features Camera Recording Using P-IN-P mode 4 1 2 Perform the steps in "Selecting a still recording effect" to select "P-IN-P" (see page 40). In Recording Standby mode, press the STILL button. An inset image of the subject is displayed. AUTO Press y to freeze the inset image. Note: Pressing y, e or r while the inset image is frozen cancels the still image. 5 Press the REC START/ STOP button. The still image of the subject will be recorded. In CARD-CAMERA mode, press the STILL button, instead of the REC START/ STOP button. To pause recording on tape Press the REC START/STOP button. To change the position of the inset image, press e or r on the Operation button. The inset image moves as shown below. AUTO To turn off the inset image Press the MENU/DISPLAY button. Useful Features To cancel still recording effects Select "OFF" in step 5 of "Selecting a still recording effect". Note: P-IN-P mode cannot be used together with the following functions. --Mosaic picture effect --DIS --16:9 --Brighter mode (`) of the gain-up function --Digital zoom AUTO 3 Adjust the Power Zoom control to frame the inset subject. AUTO 41 Letting the Subject Monitor the Shot Open the LCD monitor and rotate it 180 vertically so that the screen faces the other way and the subject can monitor the shot while you are recording with the viewfinder. If the camcorder is steadied, you can record yourself in the scene by watching yourself on the LCD monitor. The supplied remote control is useful for such occasions. 2 Set the Power switch to CAMERA. The subject is displayed in the viewfinder, and a mirror image of the subject is displayed on the LCD monitor. 3 Set the Media Selection switch to TAPE or CARD, and begin recording. Caution: Do not invert the image by rotating the monitor during recording. Useful Features Notes: The screen image is automatically inverted when the vertical rotation of the monitor is between 135 and 180. When the monitor is rotated back to within 135, the image returns to normal. If the F indicator flashes when the monitor is in the inverted position, this indicates a warning. Clearer still images can be achieved by recording with a fast shutter speed (see page 49). Reverse Playback Useful Features The reverse playback function allows you to play back video in reverse. During playback in TAPE-VCR mode, press the j button. To return to normal playback, press the PLAY button (t). Slow The slow function allows you to play back images in slow motion. During playback in TAPE-VCR mode, press the SLOW button (f). To view slow playback in reverse, press the j button. To return to normal playback, press the PLAY button (t). Note: To protect the tape, the camcorder automatically returns to normal playback if it is left in Slow mode for more than 10 minutes. 45 Using the Time Code The time code shows the hour, minute and second of recording, and the frame number (1 frame = approx. This is automatically recorded along with the subject when you are recording on the tape. You can display the time code on the screen as an accurate counter in both TAPE-VCR and TAPE-CAMERA modes. 4 Press the MENU/DISPLAY button to turn off the menu screen. The time code appears. Time code TC 0 : 0 5 : 3 5 SP To turn off the time code Select "DISP. OFF" in step 3 above. Note: When the tape reaches an unrecorded section, the time code returns to zero (TC0:00:00). Once recorded, the time code cannot be changed. Display format TC0 00 10 20 Frame number* Second Minute Hour * Displayed during still or frame advance playback. Displaying the time code on a TV during playback The example screens for this feature are for TAPE-VCR mode. 1 1 During playback or camera recording in TAPE modes, press the MENU/ DISPLAY button until the menu screen appears. Select I, then press r on the Operation button. Select "TIME CODE" (1), then press r (2). OTHERS REMOT E SOUND T I ME CODE T C OU T In TAPE-VCR mode, select I, then press r on the Operation button. Select "TC OUT" (1), then press r (2). OTHERS REMOT E SOUND T I ME CODE T C OU T Useful Features 2 OF F ON D I SP. [. . . ] Select video input channel or TV channel properly (p. 24). On-screen displays automatically change. Camcorder is in Demo mode. Video input channel on TV or TV channel is not selected properly. Audio/video cable is not properly connected. Playback mode No image appears on connected TV screen. Appendix 92 Appendix Symptom Possible cause Suggested solution Rewind or fast forward tape to desired point (p. [. . . ]