User manual SHARP VT1480D OPERATION MANUAL

[. . . ] 6 SOFTWARE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 HARDWARE AND SOFTWARE REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 POWER ON THE MACHINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 NORMAL COPYING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 MAKING A COPY DARKER OR LIGHTER . . . 30 SELECTING THE TRAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 SETTING THE NUMBER OF COPIES . . . . . . . . . . [. . . ] This function is convenient for compiling multi-page reference materials into a compact format, or for providing an overview of all pages of a document on a single page. 2 IN 1 COPY 4 IN 1 COPY Pattern 1 Pattern 2 Pattern 1 Pattern 2 Pattern 3 Pattern 4 Note · First select the layout pattern as explained in "Setting the layout pattern" (p. 44), and "Border line for 2 IN 1 / 4 IN 1" (solid line or broken line) in the system settings (p. 70). · An appropriate ratio setting will be automatically selected based on the size of the originals, the size of the paper, and the selected number of originals. When using the document glass, reduction is possible to 25%. When using the SPF/RSPF, reduction is possible to 50%. Certain combinations of original size, paper size, and number of images may result in images being cut off. · Even if "Rotation copy" is disabled in the system settings, the original images may be rotated if necessary depending on their orientation and the orientation of the paper. · 2 IN 1 / 4 IN 1 copy cannot be used in combination with dual page copying (p. 39), XY Zoom (p. 33), margin shift (p. 45), or erase copy. (p. 46) 3 Using the document glass 1 2 Place the first original. (p. 27) If the original size was not selected, 2 IN 1 / 4 IN 1 copy cannot be used. 5 When the start indicator lights, replace the original with the next original, and then press the [START] key ( ). Repeat step 5 until all originals have been scanned into memory. Note Note To clear the data in memory, press the ). [CLEAR] key ( 3 Press the [2 IN 1 / 4 IN 1] key ( / ) to select the desired mode. The mode is selected in the order "2 IN 1" ( ), "4 IN 1" ( ), "Off". 6 When all originals have been scanned, press the [READ-END] key ( ). The copy is delivered to the paper output tray. · To cancel 2 IN 1 / 4 IN 1 copying, press the [CLEAR] key ( ). · To cancel 2 IN 1 / 4 IN 1 copy mode, press the [2 IN 1 / 4 IN 1] key ( / ) repeatedly until the 2 IN 1 / 4 IN 1 indicators ( / ) are both off. Note 4 Set the number of copies and other settings, and then press the [START] key ( ). The ORIGINAL DATA indicator ( DATA ) blinks, and the original is scanned into memory. Using 2 IN 1 / 4 IN 1 copy in combination with sort copy Sort copy can be used if the original is placed on the document glass. On other models, skip to the next step. 2 If the original is placed on the document glass, select the original size. (p. 27) When using the SPF/RSPF, make sure that the same ORIGINAL SIZE indicator as your original size lights up. 1 Hold down the [MARGIN SHIFT] key ( until the MARGIN SHIFT indicator ( blinks. ) ) 3 Press the [MARGIN SHIFT] key ( ). The currently selected setting code for the margin position blinks in the display. 1: Left edge 2: Top edge The MARGIN SHIFT indicator ( ) lights up. 2 Press the [1] key or the [2] key, and then press the [START] key ( ). ). The selected setting code for the margin position lights. 3 Press the [MARGIN SHIFT] key ( The MARGIN SHIFT indicator ( blinking. ) stops 45 COPY FUNCTIONS ERASING SHADOWS AROUND THE EDGES OF A COPY (Erase Copy) This feature is used to erase shadows that appear around the edges of copies of books and other thick originals. (EDGE ERASE) The feature can also erase the shadow that appears down the centre of books and other originals that open up. (CENTRE ERASE) The factory default setting for the width of the erasure is approximately 10 mm (1/2"). The width can be changed in the system settings. (p. 71) EDGE ERASE EDGE + CENTRE ERASE Original Copy CENTRE ERASE Original Copy Original · · · · Copy Note Centre erase cannot be used in combination with dual page copy. Erase copy cannot be used in combination with 2 IN 1 / 4 IN 1 copy. (p. 43) Erase copy cannot be used when the paper is a special size or copying from the bypass tray. [. . . ] Clean the charger using the following procedure. 1 2 Turn the power switch off. Open the bypass tray and the side cover. 5 Set the charger cleaner onto the transfer charger and gently slide the cleaner in the direction indicated by the arrow two or three times. If the white sheet metal is smudged with toner, wipe it with a soft, clean cloth. 3 Lift and pull out the upper paper tray. Note Slide the charger cleaner from one end to the other end along the groove of the transfer charger. If the cleaner is stopped on the way, smudges on copies may occur. 6 Return the charger cleaner to its original position. Close the side cover by pressing the handle on the cover. [. . . ]