User manual SHARP VZ-1550H

[. . . ] As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. warning: This unit contains no user serviceable parts. Never remove covers unless qualified to do so. [. . . ] ) The time display will disappear after a few seconds. This system can play audio CD-R and CD-RW discs just as CD discs, but cannot perform recording. You can place discs on the trays 2 - 6 by following steps 3 - 5. Note: The system will search CD trays until it finds a CD and will not search the rest of trays. To play discs in turn (from Disc 1 to Disc 6) 1 Press the ON/STAND-BY button to turn the power on. " Be sure to place 8 cm (3") CD in the middle of the disc trays. After that disc finishes playing, the next disc will automatically start playback. " When there is no CD in one of the disc tray 1 - 6 positions, that position will be skipped and the next CD will be played. " When the last track on the DISC 6 has finished playing, the CD player will stop automatically. To locate the beginning of a track button again. To move to the beginning of the next track: Turn the jog dial slowly clockwise by one position during playback. Each time the TIME button on the remote control is pressed during playback or when in the pause mode, the display will change. The elapsed playing time for the current track will be displayed. The remaining playing time for the current track will be displayed. " If playback is started by pressing the button, repeat or random play will be performed on all discs. " If playback is started by pressing one of the DISC 1 - DISC 6 buttons, repeat or random play will be performed on that disc. To repeat a programmed sequence: Perform steps 1 - 6 in the "Programmed Play" section, select the repeat playback and then press the button. Notes: " After performing repeat or random play, be sure to press the button. Otherwise, the disc(s) will play continuously. " In random play, the CD player will select and play tracks automatically. (You cannot select the order of the tracks. ) To cancel repeat or random play: Press the PLAY MODE button repeatedly to select the normal play mode. [. . . ] Possible cause " Is the unit placed near the TV or computer? " Is the FM/AM loop aerial placed properly?Move the AC power lead away from the aerial if located near. When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. [. . . ]