User manual SHARP VZ-1600H

[. . . ] Web-site: www. sharp. co. uk/support TINSE0336AWZZ A0008. TO Help Line: 08705 274277 (office hours) 1 Insert a MiniDisc 2 4 3 Insert according to the direction arrow. 1 1 Slide the OPEN lever to release the compartment door. 3 Insert a MiniDisc as shown. 4 Close the compartment door. When you record on a MiniDisc, check that the erase prevention tab is set to the "recordable" position. 2 Lift it up the compartment. Recordable Recording prevented Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) 2 Connect the AC adaptor AC 230-240V, 50/60 Hz RELEASE LOCK To the DC IN 5V socket. To wall socket. [. . . ] 4 Close the compartment door. When you record on a MiniDisc, check that the erase prevention tab is set to the "recordable" position. 2 Lift it up the compartment. Recordable Recording prevented Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) 2 Connect the AC adaptor AC 230-240V, 50/60 Hz RELEASE LOCK To the DC IN 5V socket. To wall socket. Insert securely, all the way in. 1 Move the Charge/Operation switch to CHARGE mode (RELEASE). 3 Move the Charge/Operation switch to OPERATION mode (LOCK). 2 Insert the portable MD into the battery charger. 4 Plug the AC adaptor. Before using the unit with a rechargeable battery, the battery has to be charged. Refer to "Using with the rechargeable battery", page 12 (operation manual) for details. Caution: q Before setting the main unit to the battery charger, make sure the battery charger is in CHARGE mode (RELEASE). If you insert the main unit by force whilst in OPERATION mode (LOCK), the hook for fixing the main unit may break. q If the Charge/Operation switch is not set to OPERATION mode, no operation is possible. TOC display About the TOC After any recording or editing function "TOC" (Table Of Contents) is displayed. To finalise the recording or editing function, press the · s / :OFF button. During this process "TOC" will flash and "TOC EDIT!" will be displayed. During any recording or editing function the MiniDisc unit Lid is locked, the MiniDisc can not be removed until the process is finalised. Warning q If the power is removed (Battery/AC adapter) whilst "TOC" is displayed the MiniDisc unit lid will remain locked until the battery/main power is restored and the unit is turned on. Your new recordings or edited changes will be lost and your MiniDisc may become unusable. To update the recorded contents of the MiniDisc Press the · s / :OFF button whilst in the stop mode. q The power turns off after recorded contents have been updated on the MiniDisc. Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) Playing 1 Insert the earphones plug firmly into the earphones socket on the remote control unit. 2 Plug the remote control into the 3 Insert a MiniDisc. [. . . ] Warning q If the power is removed (Battery/AC adapter) whilst "TOC" is displayed the MiniDisc unit lid will remain locked until the battery/main power is restored and the unit is turned on. Your new recordings or edited changes will be lost and your MiniDisc may become unusable. To update the recorded contents of the MiniDisc Press the · s / :OFF button whilst in the stop mode. q The power turns off after recorded contents have been updated on the MiniDisc. Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) Playing 1 Insert the earphones plug firmly into the earphones socket on the remote control unit. 2 Plug the remote control into the 3 Insert a MiniDisc. [. . . ]