User manual SHARP WA-TR30

[. . . ] Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one. *) Please contact your local authority for further details. If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand according to local requirements. [. . . ] Some WMA files may not be playable/transferable onto this products due to their license agreements with copyright holders. Some audio data may not be playable on this products. When the SD/MMC card is installed the unit will not play DRM 10 protected music as mandated by Microsoft but DRM 9 or non DRM protected music will play normally. File format of transferred audio data: Depending on the setting of Windows Media Player, audio data may be converted automatically for playback on portable devices. On Windows Media Player 10, you can change this setting and transfer audio data without conversion. To do so, click and select "Quality" to uncheck "Convert files as required by the device (recommended)". For details on Windows Media Player, refer to its User Guide. For details, refer to the operation manual for the PC. WA-TR30(BK)/(W) WA-TR300(BK)/(W) ENGLISH Windows 98 Second Edition 1. Click "Safely remove hardware" on the taskbar. Click "Safely remove USB Mass Storage Device-Drives(*:)". "Safely remove hardware" appears. Resume play: When you turn off the unit and turn it back on, playback starts from the beginning of the audio data which was stopped. Hold down the Menu button for 1 second or more. 3 Within 20 seconds, press or button to select "Settings" and press Menu button. Main Menu Settings Del Files About E-14 Playing selected data 4 Within 20 seconds, press or button to select "Playmode" and press Menu button. Within 20 seconds, press or button to select a play mode setting, press Menu button. Settings Playmode Eq Contrast WA-TR30(BK)/(W) WA-TR300(BK)/(W) You can select and play the audio data transferred from PC or data recorded with the unit. ENGLISH 1 2 Hold down Menu button for 1 second or more. Within 20 seconds, press Menu button to select "Navigator". Main Menu Navigator FM Radio Voice Record 5 PLAY MODE Repeat All 3 (*)Normal : Normal playback Repeat 1 : Repeat one data Repeat All : Repeat all data Shuffle : Play all data at random Preview : Play all data for a 10 seconds The setting is completed. The playback screen returns after 20 seconds. (*) indicates default setting Note: The unit plays each data for 10 seconds when play with preview mode. Within 20 seconds, press or button to select "Flash" or "Card", then press Menu button. Within 20 seconds, select the data and press / button, playback will start. 001/002 Flash:/ Card:/ 4 001/004 or : Browser for folder or data. Volume (+) : Return to the previous level/screen. Repeat A-B You can play the desired portion repeatedly by specifying it during playback. About folder tree Flash VOICE FM MUSIC Data recorded with microphone. 1 2 3 Whilst playback, press Menu button. Press the Menu button again to enter the end point (B). This starts A-B repeat from the start point (A) to the end point (B). Press the Menu button again to return to the previous playback mode. Recorded FM Radio programmes. Music data copy from PC. Caution: After perform repeat or preview play, be sure to press / button to stop or pause the playback. [. . . ] Replace the file in "C:\Program Files\SHARP\WA-TR30_ 300" with the decompressed file. Connect the unit to a PC with the USB cable. From the "Start" menu, click "All Programs", "WA-TR30_300 MP3 Audio player" and then "Firmware Download". Check the box of "Format Data Area". [. . . ]