User manual SHARP WQ-CD15H

[. . . ] This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving aerial. Increase the separation between the equipment and receiver. [. . . ] Use the direct search buttons on the remote control to select the desired track whilst playing the selected disc. Selected track number 1 Press one of the 1- 5 buttons to select the desired disc. CD or MP3/WMA disc Playback Selected disc number The direct search buttons allow you to select up to number 9. When selecting number 10 or more, use the "+10" button. For example, to choose 13 1 Press the "+10" button once. 2 Press the "3" button. 2 Within 5 seconds, press the / button on the main unit. 5 4 3 2 1 TIMER REMOTE SENSOR POWER ON/ STAND-BY c OPEN/ CLOSE CD 5 TAPE (1 2) TAPE (1 2) 4 TUNER (BAND) PRESET PRESET 3 2 B. For example, to choose 30 1 Press the "+10" button three times. If the direct search buttons are pressed whilst the disc is stopped, press the / button to start the desired track on the current disc. Notes: A track number higher than the number of tracks on the disc cannot be selected. During random play, direct search is not possible. Playback will begin from track 1 on the chosen disc. After the last track on the last disc is played, the unit stops automatically. Note: If the disc tray with no disc is selected, playback will not start and the disc indicator will disappear. Selected track number You can also select a track by pressing the or button. 4 5 Press the MEMORY button to save the track number. Repeat steps 2 - 4 for other tracks. If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR/DIMMER button. Press the / button to start playback. 6 7 E-26 MP3/WMA navigation (only for MP3/WMA files) MP3/WMA navigation: You can search and play files by folder or title. For example, when you assign three titles to a file, enter genre (such as jazz) as title 1, album name as title 2, and music title as title 3 to search the file by any title. You can search and play files by folder or title 1/2/3 within one MP3/WMA disc (see page 28). By entering a name, you can search files by folder or title 1/2/3 within one MP3/WMA disc (see page 29). Folders or titles can be programmed within one MP3/WMA disc (see page 30). When you enter file names on your PC, connect words with hyphens. This product recognises the first word as title 1, second one as title 2, and third one as title 3. Example: Folder Title 1 AAA (POPULAR-HITS 1-A MUSIC. mp3) (POPULAR-HITS 2-B MUSIC. mp3) BBB (JAZZ-HITS 1-A MUSIC. mp3) (JAZZ-HITS 2-B MUSIC. mp3) CCC (ROCK-HITS 1-A MUSIC. mp3) (ROCK-HITS 2-B MUSIC. mp3) (ROCK-HITS 3-C MUSIC. mp3) (ROCK-HITS 4-D MUSIC. mp3) Notes: MP3 files must have the extension ". mp3". WMA files must have the extension ". wma". [. . . ] Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc (or cassette) in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit. Remote control Symptom The remote control does not operate. Possible cause Is the AC power lead of the unit plugged in? [. . . ]