User manual SHARP XE-A201

[. . . ] ELECTRONIC CASH REGISTER CAJA REGISTRADORA ELECTRONICA MODEL MODELO XE-A201 INSTRUCTION MANUAL MANUAL DE INSTRUCCIONES How to Use the Instruction Manual Printing a Document To print the current document, click the Print button Finding words To find a complete word or part of a word in the current document, click here. Paging through a document page. To go to the next page, click the > button. To go to the previous Using Acrobat Reader This manual is in the format of Acrobat Reader. For the details of how to Browsing with bookmarks Bookmarks can mark parts of a document for quick access. The scroll bar also enables you to page through the document. The illustration above is a screen of Acrobat Reader 5. 0. WARNING FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Bring the print head back to the correct position, then press the l key. The printer will print the power failure symbol and resume printing. 3 Cautions in Handling the Printer and Recording Paper Cautions in handling the printer · Avoid dusty and humid environments, direct sunlight and iron powder (a permanent magnet and electromagnet are used in this machine. ) · Use the print head release lever only when necessary. · Never pull the paper when it is in contact with the print head. First release the head with the print head release lever, and then remove the paper. · Never touch the surface of the print head. · Never touch around the print head and the motor during printing or before they have had sufficient time to cool. Cautions in handling the recording paper (thermal paper) · Use only the paper specified by SHARP. · Do not unpack the thermal paper until you are ready to use it. The paper will color at around 70°C. · Avoid dusty and humid storage places. · The printed text on the paper can discolor under conditions of high humidity and temperature, exposure to the direct sunlight, contact with glue, thinner or a freshly copied blueprint, and heat caused by friction from scratching or other such means. · Be very careful when handling the thermal paper. If you want to keep a permanent record, copy the printed text with a photocopier. 62 4 Replacing the Batteries This cash register displays a low battery symbol ( ) when the batteries are low, and displays a no battery symbol ( ) when batteries are extremely low or batteries are not installed. When the low battery symbol is displayed, replace the batteries with new ones as soon as possible. The existing batteries will be dead in about two days. When the no battery symbol is displayed, replace the batteries immediately. Otherwise, if the AC power cord is disconnected or a power failure occurs, all the programmed settings will be reset to the default settings and any data stored in memory will be cleared. Be sure to observe precautions shown on page 1 when handling batteries. To replace the batteries: 1. Make sure that the cash register is plugged in. Turn the mode switch to the REG position. Open the battery compartment cover next to the paper roll cradle and remove the old batteries. 5. Install three new "AA" batteries in the battery compartment. Be sure the positive and negative poles of each battery are facing in the proper direction. When they are installed correctly, the " " or " " symbol will disappear. [. . . ] · ¿Está el carrete de toma bien instalado en el rodamiento?· ¿Hay algún atasco de papel?· ¿Se ha seleccionado la impresión del registro diario en la programación del estilo de impresión?(Si se ha seleccionado la impresión de recibos, el papel no se bobinará en torno al carrete de toma. ) · ¿Está la palanca de liberación del cabezal de impresión en la posición de impresión? [. . . ]