User manual SHARP XE-A203

[. . . ] The cash register should be securely fitted to the supporting platforms to avoid instability when the drawer is open. The socket-outlet shall be installed near the equipment and shall be easily accessible. For a complete electrical disconnection pull out the mains plug. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. [. . . ] For a refund of a PLU item, enter the PLU code and press the f key, then press the p key. For a refund of a subdepartment item, enter the PLU code and press the f key and p key, then enter the refund amount and press the p key. Key operation example You can enter a non-add code number such as a customer's code number and credit card number, a maximum of 16 digits, at any point during the entry of a sale. the cash register will print it at once. To enter a non-add code number, enter the number and press the s key. Key operation example Receipt print For an additional payment in foreign currency Preset exchange rate After an entry is completed or After the amount tendered is found smaller than the sales amount in a sales entry *Exchange rate For direct finalization Press the l key after pressing the V key to cancel payment in a foreign currency. If "Yes" is selected for cheque and credit operation when tendering in foreign currency in EURO programming, you can finalize a sale in foreign currency using the X, Y, c or b key with preset exchange rate operation. If programmed, a foreign currency symbol is printed when you use a preset rate. Key operation example Receipt print Key operation example Receipt print When you receive on account from a customer, use the r key. for the received-on-account (RA) entry , enter the amount , and press the r key. Cash tendering only available for RA operation. Key operation example When you pay an amount to a vendor, use the R key. for the paid-out (PO) entry , enter the amount and press the R key. Cash tendering only available for PO operation. Key operation example When you need to open the drawer with no sale, press the A key. the drawer will open and printer will print "NO SALE" on the receipt or journal. If you let the machine print a non-add code number before pressing the A key, a no sale entry is achieved and a non-add code number is printed. You can achieve a programmed transaction simply by pressing the a key. refer to "AUTO key programming Automatic sequence key" for the programming. Key operation example Receipt print Check to see whether a paper roll is present in the machine. If there is not enough REG OPX/Z MGR paper on a roll, replace it with a new one (refer to "Replacing the Paper Roll" on X1/Z1 page 82 for the replacement). X2/Z2 Put the manager key in the mode switch and turn it to the PGM position. [. . . ] Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one. [. . . ]