User manual SHARP XE-A217 QUICK START GUIDE

[. . . ] Please read this manual carefully before operating your machine in order to gain full understanding of functions and features. Please keep this manual for future reference. It will help you if you encounter any operational problems. Be very careful when removing and replacing the printer cover, as the cutter mounted on it is very sharp. [. . . ] The data is useful for making purchasing decisions and other store operations. *To program departments 17 through 32, press the department shift key. To program another department, start from the beginning without pressing the A key. Taxable Non-taxable* Taxable Non-taxable* Taxable Non-taxable* Taxable* Non-taxable SICS Normal* Negative department Positive department* Open and preset Preset only Open only* Inhibit department key When any entry of a taxable department is made in a transaction, tax is automatically computed according to the associated tax rate as soon as the transaction is completed. If an entry of a department programmed for SICS is made first, the sale will be finalized as a cash sale as soon as the department key is pressed. If the entry is made after entering a department not programmed for SICS, the sale will not be finalized until the A key is pressed. entry digit limit · Set the number of allowable digits for the maximum entry amount for each department. the limit is effective for operations in the REG mode and can be overridden in the MGR mode. Key operation example *To program departments 17 through 32, press the department shift key. To program another department, start from the beginning without pressing the A key. Key operation example If a department is not programmed to allow the entry of preset unit prices in functional programming, the department is automatically changed to allow the entry of preset unit prices by this programming entry. for the layout , please refer to "Keyboard" section on page 5. The following are used as control keys for character entry: H Toggles between upper-case and lower-case letters. by default , the upper-case letter is selected. Once the H key is pressed, you are locked in for entering lower-case letters. "_" lights up at the SHIFT position of the display when lower-case letters entry is selected. N Press the N key to enter numeric characters. For example to enter "1", press the N and 1 key. If you press the 1 key without pressing the N key, the cash register goes to character codes entry mode. Once the N key is pressed, you are locked in for entering numeric characters. "_" lights up at the NUMBER position of the display when numeric characters entry is selected. Once the W key is pressed, you are locked in for entering double size characters. [. . . ] the 8-denomination coin case is also detachable from the till. To detach the drawer, pull it forward fully with the till removed, and remove it by lifting it up. However, when a power failure occurs or the machine becomes out of order, slide the lever located on the bottom of the machine in the direction of the arrow. ) The drawer will not open if it is locked with the key. [. . . ]