User manual SHARP XE-A42S

[. . . ] ELECTRONIC CASH REGISTER CAJA REGISTRADORA ELECTRONICA MODEL MODELO XE-A42S INSTRUCTION MANUAL MANUAL DE INSTRUCCIONES WARNING FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. [. . . ] The limit is effective for operations in the REG mode and can be overridden in the MGR mode. example: Programming department 2 as normal dept. Group 1, commission group 1, taxable 1, SICS, negative department, entry digit limit - 7 digits, and allowing open & preset entry. (ABCDEFGHIJK: 01100011173) Key operation example Print 01100011173 @ ™A Dept. Group Commission group From left, AHJK Tax status Sign(I) Preset unit price To program zero Unit price (max. Key A A *To program departments 21 through 40, press the department shift key. Six digits) d s Print To program another department, start from the beginning without pressing the A key. Key operation example 1000 ¡ A Unit price If a department is not programmed to allow the entry of preset unit prices in functional programming, the department is automatically changed to allow the entry of preset unit prices by this programming entry. 14 9:11 AM Page 38 2 PLU/UPC Programming The cash register can handle PLU codes and UPC codes. PLU (Price Look-Up) codes are used for PLU and sub-department functions: The PLU function allows speedy key entries whereby a price is automatically called up when a code is entered. The sub-department is a kind of “open PLU”, which requires you to enter a price after the PLU code is entered. PLU codes consist of 4-digit numbers and leading zeros can be applied to the PLU codes. The cash register allows you to keyboard UPC-A (number system character: 0, 2, 3, 4, 5), UPC-E, EAN-8 and EAN-13 barcodes. The register also allows you to keyboard add-on codes (2 digits or 5 digits) added to EAN-13 codes except ISBN and ISSN codes. Unit prices for UPC codes must be preset. This means that even if price information is contained in a code, the register does not refer to it for sales registration. a maximum of 7000 PLU or UPC codes settings are possible. Each one belongs to a department and acquires the department's parameters (dept. A commission group (0 to 2, 0: No commission is applied) can be assigned to each department for commission for clerks. Each commission amount for individual clerk is calculated based on the corresponding programmed commission rate and printed later on clerk reports. The cash register is preprogrammed so PLU1 through PLU1200 as PLUs (commission group: 0) associated with department 1 and preset unit price “0”. Unit price and associated department assignment To program zero PLU/UPC code *1 p *2 Unit price (max. [. . . ] 6 digits Function A BR (bottle return) Bottle return: 1, Normal: 0 B G (group number) 0 to 9 (0: non group) C CM (commission group numer) 0 to 2 (0: non commission) D-G T4 - T1 (taxable 4 - taxable 1) Taxable: 1, Non-taxable: 0 H SICS (single item cash sale) SICS: 1, Normal: 0 I SIGN Negative dept. 14 9:23 AM Page 82 Programming sheet for PLU/UPCs (Please make copies of this sheet. Enter entry limit amount for sub-departments. Function A CM (commission group number) 0 to 2 (0: non commission) B TYPE (PLU/sub-department selection) 1: PLU, 0: Sub-department For UPCs always set 1. [. . . ]