User manual SHARP XG-C355W

[. . . ] 4 Wide-zoom Lens (AN-C12MZ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Tele-zoom Lens (AN-C18MZ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Tele-zoom Lens (AN-C27MZ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Tele-zoom Lens (AN-C41MZ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Factory default setting: 192. 168. 150. 2 Enter an IP address appropriate for the network. Subnet You can set this item when "DHCP Mask Client" is set to "OFF". Factory default setting: 255. 255. 255. 0 Set the subnet mask to the same as that of the computer and equipment on the network. Default You can set this item when "DHCP Gateway Client" is set to "OFF". Factory default setting: 0. 0. 0. 0 * When not in use, set to "0. 0. 0. 0". DNS Factory default setting: 0. 0. 0. 0 Server * When not in use, set to "0. 0. 0. 0". Note · Confirm the existing network's segment (IP address group) to avoid setting an IP address that duplicates the IP addresses of other network equipment or computers. If "192. 168. 150. 2" is not used in the network having an IP address of "192. 168. 150. XXX", you don't have to change the projector IP address. · For details about each setting, consult your network administrator. 5 6 Click the "Apply" button. The set values appear. Confirm that the values are set properly, and then click the "Confirm" button. · · · · Close the browser. After setting items, wait for 10 seconds and then re-access. Change the IP address of the setting computer back to its original address, which you have noted down in Step 6-1 on page 21, and then connect the computer and the projector to the network. -23 Controlling the Projector via LAN After connecting the projector to your network, enter the projector IP address in "Address" on Internet Explorer (version 5. 0 or later) using a computer on the network to start a setup screen that will enable control of the projector via the network. Controlling the Projector Using Internet Explorer (Version 5. 0 or later) Complete connections to external equipment before starting the operation. · You can input the characters below : a-z, A-Z, 0-9, -, _ -26 Controlling the Projector via LAN Making General Settings for the Network (Network General) Setting for Sending E-mail when an Error Occurs (Mail ­ Originator Settings) On this screen, you can make settings for sending e-mail to report when the projector has generated an error. On this screen, you can make general settings relating to the network. Items Projector Name Auto Logout Time Description Setting the projector name. Setting the time interval in which the projector will be automatically disconnected from the network in units of a minute (from 1 to 65535 minutes). If the set value is made 0, the Auto Logout function is disabled. Setting the TCP port number used when exchanging data with the projector (from 1025 to 65535). Setting the port number used when searching for the projector (from 1025 to 65535). Items SMTP Server Setting example / Remarks Setting an SMTP server address for e-mail transmission. e. g. 1 : 192. 168. 150. 253 e. g. 2 : smtp123. sharp. co. jp * When using a domain name, make settings for the DNS server. Setting the projector's e-mail address. The e-mail address set here becomes Originator E-mail Address. The name set here appears in the "Originator Name" column of the body of the message. Originator E-mail Address Originator Name Data Port Search Port Note · SMTP Server, Originator E-mail Address and Originator Name can be up to 64 characters. [. . . ] \ Check that the LAN cable is a cross-over cable when connecting the projector to a computer directly. \ Check that the LAN cable is a straight-through cable when connecting the projector with a network device such as a hub. \ Check that the power supply is turned on for the network device such as a hub between the projector and a computer. Check the network settings for the computer and the projector \ Check the following network settings for the projector. · IP Address Check that the IP address for the projector is not duplicated on the network. [. . . ]