User manual SHARP XG-NV51XE

[. . . ] OPERATION MANUAL MODEL XG-NV51XE LCD PROJECTOR This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/ EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/ 336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE. Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/ 23/EEG, gewijzigd door 93/68/EEG. [. . . ] 4 Press ß/© to move the mark of the selected adjustment item to the desired setting. 5 To exit from the GUI, press MENU. · To reset all adjustment items, select "Reset" on the "Audio" menu screen and press ENTER. 3 Operation 25 Computer Image Adjustments Projector ON MUTE OFF BLACK SCREEN LASER TOOLS MENU MOUSE ADJ. VOL 1, 5 2, 3, 4 When displaying computer patterns which are very detailed (tiling, vertical stripes, etc. ), interference may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen. Should this occur, adjust "Clock", "Phase", "H-Pos" and "V-Pos" for optimum computer image. Description of Adjustment Items Selected item R-CLICK ENTER INPUT IrCOM Description Adjusts vertical noise. Adjusts horizontal noise (similar to tracking on your VCR). Centres the on-screen image by moving it to the left or right. Centres the on-screen image by moving it up or down. FREEZE AUTO SYNC Clock Phase H-Pos V-Pos · Computer image adjustment can be made easily by pressing AUTO SYNC ( ) on the projector or the "Power" remote control. See the next page for details. (GUI) On-Screen Display 2 (Select the desired computer input mode with INPUT on the projector or the "Power" remote control. ) (For use with the "Power" remote control, slide the MOUSE/ADJUSTMENT switch to the ADJ. Menu bar and "Picture" menu screen appear. 2 Press ß/© to select "Fine Sync". 3 Press / to select a specific adjustment item. 4 Press ß/© to move the mark of the selected adjustment item to the desired setting. 5 To exit from the GUI, press MENU. · To reset all adjustment items, select "Reset" on the "Fine Sync" menu screen and press ENTER. Operation 3 26 Computer Image Adjustments Projector ON MUTE OFF BLACK SCREEN LASER TOOLS MENU MOUSE ADJ. Auto Sync Adjustment VOL 1, 5 2, 3, 4 R-CLICK ENTER · Used to automatically adjust a computer image. · Auto Sync adjustment can be made manually by pressing AUTO SYNC on the projector or the "Power" remote control, or automatically by setting "Auto Sync" to "ON" in the projector's GUI menu. When "Auto Sync" is set to "ON": · The sync adjustment is automatically made each time the projector is turned on while connected to a computer or the input selection is changed. · The Auto Sync adjustment setting previously made is cleared when the projector's setting is changed. (For use with the "Power" remote control, slide the MOUSE/ADJUSTMENT switch to the ADJ. position. ) INPUT IrCOM FREEZE AUTO SYNC AUTO SYNC button KEYSTONE ENLARGE (GUI) On-screen Display 1 2 3 4 5 Press MENU. Press ß/© to select "Fine Sync". Press / to select "Auto Sync". Press ß/© to select "ON". To exit from the GUI, press MENU. Operation · Automatic adjustments can be made by pressing AUTO SYNC on the projector or the "Power" remote control. · When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. [. . . ] Sync on green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F Fit to screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Focus knob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Foot release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FREEZE button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]