User manual SHARP XL-1500/1600H

[. . . ] KOMPAKT-AUDIO-SYSTEM CHANE AUDIO COMPACTE CADENAS MICRO COMPACTAS KOMPAKT AUDIOSYSTEM SISTEMA COMPATTO AUDIO COMPACT AUDIOSYSTEEM SISTEMA DE UDIO COMPACTO COMPACT AUDIO SYSTEM MODELL MODLE MODELO MODELL MODELLO MODEL MODELO MODEL q Kompakt-Audio-System XL-1500H/XL-1600H besteht aus XL-1500H/XL-1600H (Hauptgert) und CP-XL1500H/CP-XL1600H (Lautsprechersystem). q Chane audio compacte XL-1500H/XL-1600H compose de XL-1500H/XL-1600H (appareil principal) et de CP-XL1500H/CP-XL1600H (enceintes acoustiques). q Cadenas micro compactas XL-1500H/XL-1600H que consta de XL-1500H/XL1600H (aparato principal) y CP-XL1500H/CP-XL1600H (sistema de altavoces). q XL-1500H/XL-1600H kompakt audiosystem bestende av XL-1500H/XL-1600H (huvudenhet) och CP-XL1500H/CP-XL1600H (hgtalarsystem). [. . . ] Keep the control cover closed when the unit is not used. E-9 01/12/12 1500H_E1. fm - General control - Dimmed Brightened Basic Operation XL-1500H XL-1600H Sound control , , Adjusting the bass Main unit operation: 1 Press the BASS/TREBLE button until "BASS" appears on the display. 2 Within 5 seconds, press the VOLUME ( or ) button to adjust the bass. Remote control operation: Press the BASS ( or ) button to adjust the bass. ENGLISH -5 . . . 0 . . . 5 Basic Operation , , Adjusting the treble - Sound control - Main unit operation: 1 Press the BASS/TREBLE button until "TRE" appears on the display. 2 Within 5 seconds, press the VOLUME ( or ) button to adjust the treble. Remote control operation: Press the TREBLE ( or ) button to adjust the treble. -5 . . . 0 . . . 5 , , Setting the surround Press the SURROUND button to allow you to enjoy music that seems to surround you. To cancel the surround mode, press the SURROUND button again. , , Adjusting the volume Press the VOLUME button to increase the volume and the VOLUME button for decreasing. SURROUND Indicator Note: The surround effect cannot be obtained from monaural sound signals. MIN 1 2 . . . . . 28 29 MAX E-10 01/12/12 1500H_E1. fm Setting the clock 3 Within 1 minute, press the PRESET ( or ) button to adjust the hour and then press the MEMORY button. XL-1500H XL-1600H ENGLISH When the 12-hour display is selected, "AM" will change automatically to "PM". 4 This may be operated only with the remote control. In this example, the clock is set for the 24-hour (0:00) display. Within 1 minute, press the PRESET ( or ) button to adjust the minutes and then press the MEMORY button. The clock starts from "0" second. (Seconds are not displayed. ) To confirm the time display when the power is on: Press the CLOCK button. The time display will appear for about 5 seconds. Note: The "0:00" or time will flash at the push of the CLOCK button when the AC power supply is restored after a power failure or unplugging the unit. To readjust the clock: Perform "Setting the clock" from the beginning. If the time display is flashing, step 2 (for selecting the 24-hour or 12-hour display) will be skipped. To change the 24-hour or 12-hour display: 1 Clear all the programmed contents. [Perform to step 3 under "If trouble occurs" on page 29 for details. ] 2 Perform "Setting the clock" from the beginning. 2 Within 1 minute, press the PRESET ( or ) button to select 24-hour or 12-hour display and then press the MEMORY button. "0:00" "AM 12:00" The 24-hour display will appear. (0:00 - 23:59) The 12-hour display will appear. (AM 12:00 - PM 11:59) Note that this can only be set when the unit is first installed or it has been reset. (Refer to step 3 under "If trouble occurs" on page 29. ) E-11 01/12/12 1500H_E2. fm - Setting the clock - 1 Press the CLOCK button and within 3 seconds, press the MEMORY button. Basic Operation XL-1500H XL-1600H Listening to a CD This system can play audio CD-R and CD-RW discs just as CD discs, but cannot perform recording. Playback of audio CD-R or CD-RW may not be performed depending on the disc state or the device you used for recording. ENGLISH 1 2 Press the ON/STAND-BY button to turn the power on. Press the FUNCTION button until "CD STOP" appears on the display. z When operating with the remote control, press the CD button. z If no disc is loaded, the display will be "NO DISC" instead of "CD STOP". 3 Press the partment. OPEN/CLOSE button to open the CD com- CD Playback - Listening to a CD - 4 Place a CD on the spindle, label side up. 5 Press the partment. OPEN/CLOSE button to close the CD com- z The CD playback will start automatically. [. . . ] z Set this unit to the power stand-by mode and then turn it back on. z If the unit still malfunctions, reset it. (Refer to step 3 under "If trouble occurs" on page 29. ) z Are the headphones connected?z Are the speaker wires disconnected? , , Remote control The remote control z Is the AC power lead of the unit plugged in? [. . . ]