User manual SHARP XL-DH229N

[. . . ] Bei Einstellung der ON/STAND-BY-Taste auf STANDBY ist die Netzspannung immer noch im Gerät vorhanden. Wenn die ON/STAND-BY-Taste auf STAND-BY gestellt ist, können Sie das Gerät mit der Fernbedienung einschalten. Warnung: In diesem Gerät sind keine vom Benutzer wartbaren Teile vorhanden. Niemals Abdeckungen entfernen, außer wenn Sie dafür qualifiziert sind. [. . . ] You may be injured. After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. If you plug in the unit first, the unit will enter the stand-by mode. Note: Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time. Connecting iPod to a TV The iPod with photo and video can be viewed by connecting to a TV/monitor. If the TV/monitor has a video input, connect it to the VIDEO OUT socket on the rear of the unit. Notes: iPod video can only be played through VIDEO OUT socket only. Please make sure to set iPod unit to either NTSC or PAL to match your TV signal. Please visit Apple's homepage for further information. Remote control Battery installation Notes concerning use: Replace the batteries if the operating distance is reduced or if the operation becomes erratic. Purchase 2 "AAA" size batteries (UM-4, R03, HP-16 or similar). Periodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth. Exposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit if this occurs. Last memory not function. When playing a disc recorded with Dolby Digital or DTS, the corresponding digital signals will be output. PCM : Choose this setting if the decorder cannot support Dolby Digital or DTS. RAW : Choose this setting if the decorder can support Dolby Digital or DTS. Select the sampling frequency at 48 kHz/ 16 bit or 96 kHz/24 bit capability after you select SPDIF/PCM at SPDIF SETUP. E-8 Changing the setup menu (continued) Setup menu Selectable parameters (* indicates default setting) DOLBY DUAL STEREO* DIGITAL MONO L-MONO R-MONO MIX-MONO DYNAMIC (*1) FULL 3/4 1/2 1/4 OFF* VIDEO SETUP PAGE - - VIDEO SETUP PAGE - VIDEO OUTPUT COLOR SETTING DivX VOD SVIDEO Description Audio with fully compressed dynamic range. Audio with partially compressed dynamic range. SVIDEO : Choose this setting for SVIDEO output. COMPONENTS:Choose this setting for COMPONENT output. SCART : Choose this setting for SCART output. VIDEO OUTPUT (*2) SVIDEO (*3) COMPONENTS SCART* GO TO VIDEO SETUP PAGE COLOR SETTING HIGH MEDIUM* LOW BRIGHTNESS -20 ­> 0* ­> +20 CONTRAST GAMMA -16 ­> 0* ­> +16 HIGH MEDIUM* LOW NONE -9 ­> 0* ­> +9 -9 ­> 0* ­> +9 SHARPNESS HUE SATURATION DivX VOD LUMA DELAY 0T* 1T OK PREFERENCE PAGE - - PREFERENCE PAGE - TV TYPE PBC AUDIO SUBTITLE DISC MENU PARENTAL DEFAULT PAL ON ENG ENG ENG TV TYPE PBC AUDIO GO TO PREFERENCE PAGE SUBTITLE DISC MENU PAL* AUTO NTSC ON* OFF ENGLISH* GERMAN FRENCH PORTUGUESE SPANISH ITALIAN ENGLISH* GERMAN FRENCH PORTUGUESE SPANISH ITALIAN OFF ENGLISH* GERMAN FRENCH PORTUGUESE SPANISH ITALIAN SHARP provide you the DivX registration code that allows you to rent and purchase videos using the DivX service. Please go to www. divx. com/ vod for more information. Select the language audible from the speakers. Select the subtitle displayed on the TV screen. E-9 Changing the setup menu (continued) Setup menu Selectable parameters (* indicates default setting) PARENTAL 1 KID SAFE 2G 3 PG 4 PG 13 5 PGR 6R 7 NC 17 8 ADULT* DEFAULT RESET PASSWORD ON* MODE OFF PASSWORD CHANGE Description Set a restriction level for DVD viewing. (For details, see page 11) PASSWORD SETUP PAGE - - PASSWORD SETUP PAGE - PASSWORD MODE PASSWORD ON This resets all setting (Except for Parental and Password) to factory default. [. . . ] 2 If the unit is not restored in the previous operation, unplug and plug in the unit again, and then turn the power on. Note: If neither operation above restores the unit, clear all the memory by resetting it. USB Symptom Possible cause Is there any MP3/WMA file Is the device properly connected? Does the device contain AAC file Device cannot be detected. available? Playback does not start. Is it a false MP3 file? Is Variable Bitrate file being played Is the File Name written in Chinese Before transporting the unit back? or Japanese characters? Remove the CD from the unit. [. . . ]