User manual SHARP XL-DH259P

[. . . ] ENGLISH MODEL XL-DH259P MICRO COMPONENT SYSTEM OPERATION MANUAL XL-DH259P Micro Component System consisting of XL-DH259P (main unit) and CP-DH259P (speaker system). iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc. , registered in the U. S. and other countries. M I C RO COM PON ENT SYST EM XL-DH259 "Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Accessories Please confirm that the following accessories are included. iPhone adaptor x 2 Remote control x 1 RRM CGA 232 AWS A AM loop aerial x 1 FM aerial x 1 Special Notes Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. Please refer to the relevant laws in your country. [. . . ] This USB memory cannot be operated via USB hub. The USB terminal in this unit is not intended for a PC connection but is used for music streaming with a USB memory device. External HDD-storage cannot be played back via USB terminal. If the data inside the USB memory is large, it may take longer time for the data to be read. This product can play WMA and MP3 files. It will automatically detect the file type being played. If unplayable file is played on this product, "NO SUPPORT" is indicated and the file will be automatically skipped. If abnormal indications appear on the display due to the unspecified file, turn off the unit and then turn it on again. This product relates to USB mass storage devices and MP3 players. It may however face some irregularities due to various unforeseen reasons from some devices. Should this happen, turn off the unit and then turn it on again. The USB port is only intended for direct connection to a USB memory device without any cable. During CD function, MP3 player will not be charging. Note: This product is not compatible with MTP and AAC file systems from USB mass storage device or MP3 player. To play back USB/MP3 player with folder mode off 1 Press the USB button on the remote control or FUNCTION button repeatedly on main unit to select USB function. Connect the USB memory device that has MP3/WMA format files on the unit. When the USB memory is connected to the main unit, the device information will be displayed. 2 Select desired file to be played back by pressing the or button. 3 Press the (CD/USB ) button. Playback will start and the file name will be displayed. Title, Artist and Album name are displayed if they are recorded in the USB memory device. Display content can be changed by pressing the DISPLAY button. Note: To pause playback: (CD/USB Press the ) button. To play back USB/MP3 player with folder mode on 1 Press the USB button on the remote control or FUNCTION button repeatedly on main unit to select USB function. Connect the USB memory device that has MP3/WMA format files on the unit. When the USB memory is connected to the main unit, the device information will be displayed. 2 Press the FOLDER button, and press the PRESET ( or ) button to select desired playback folder. [. . . ] Then, set the unit to the power stand-by mode. Carrying the unit with iPod/iPhone or USB memory device left docked or discs left inside might damage the unit. iPod or iPhone will not charge. "This accessory is not made to work with iPhone" or similar, appears on iPhone screen. Care of compact discs Compact discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your CD collection and player. Do not write on either side of the disc, particularly the non-label side from which signals are read. [. . . ]