Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SHARP XL-DK227N. We hope that this SHARP XL-DK227N user guide will be useful to you.
Lastmanuals help download the user guide SHARP XL-DK227N.
Detailed instructions for use are in the User's Guide.
[. . . ] Quando il tasto ON/STAND-BY è impostato su STAND-BY, l'unità può essere azionata con il telecomando.
Avvertenza:
L'apparecchio non contiene parti riparabili dall'utente. Non togliere mai i coperchi, a meno di non essere qualificati per farlo. All'interno dell'apparecchio ci sono tensioni pericolose, per cui si deve sempre staccare la spina del cavo d'alimentazione dalla presa di corrente prima di qualsiasi intervento di manutenzione e quando non si usa l'apparecchio per un lungo periodo di tempo. Wanneer de ON/STAND-BY toets in de STAND-BY stand staat, loopt er nog steeds stroom (netspanning) in het toestel. [. . . ] If you plug in the unit first, the unit will enter the stand-by mode. Note: Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time.
Remote control
Battery installation Test of the remote control
1 Open the battery cover. 2 Insert the supplied batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them towards the battery terminals. 3 Close the cover.
After installing the unit (see pages 6 - 7), check that the remote control operates correctly. Point the remote control directly at the remote sensor on the unit. The remote control can be used within the range shown below: Press the ON/STAND-BY button. Remote sensor
Precautions for battery use: Replace all old batteries with new ones at the same time. Remove the batteries if the unit will not be used for long periods of time. This will prevent potential damage due to battery leakage. Caution: Do not use rechargeable batteries (nickel-cadmium battery, etc. ). Last memory not function.
GO TO AUDIO SETUP PAGE
LPCM OUTPUT
48K* 96K
Useful whilst using HDMI cable. When playing a disc recorded with Dolby Digital or DTS, the corresponding digital signals will be output from the HDMI Output socket. PCM : Choose this setting if the HDMI TV cannot support Dolby Digital or DTS to avoid noise or mute from the TV. RAW : Choose this setting if the HDMI TV can support Dolby Digital or DTS. Select the sampling frequency at 48 kHz/ 16 bit or 96 kHz/24 bit capability after you select SPDIF/PCM at SPDIF SETUP.
E-8
Changing the setup menu (continued)
Setup menu Dolby Selectable parameters (* indicates default setting) DUAL STEREO* MONO L-MONO VIDEO GENERAL AUDIO DOLBY PREFERENCE R-MONO - - DOLBY DIGITAL SETUP - DUAL MONO MIX-MONO DYNAMIC DYNAMIC FULL (*1) 3/4 1/2 GO TO DOLBY DIGITAL SETUP 1/4 OFF* VIDEO OUTPUT (*2) S-VIDEO COMPONENTS SCART* Description
Audio with fully compressed dynamic range. Audio with partially compressed dynamic range. SVIDEO : Choose this setting for S-VIDEO output. COMPONENTS: Choose this setting for COMPONENT output. SCART : Choose this setting for SCART output. You can select HDMI resolution whilst using HDMI cable. If you use TV without multi-system (PAL or NTSC only) whilst doing HDMI setup, select any resolution with 50 Hz only for PAL system. [. . . ] Has condensation formed inside the unit?
Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, etc. ) or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit.
Symptom Playback does not start. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP XL-DK227N
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP XL-DK227N will begin.
