User manual SHARP XL-DK257NH

[. . . ] MIKRO KOMPONENTEN SYSTEM MICRO-CHANE SISTEMA MICRO COMPONENTE MIKRO KOMPONENT SYSTEM MICRO SISTEMI MICRO SYSTEEM SISTEMA DE MICRO COMPONENTE MICRO COMPONENT SYSTEM MODELL MODLE MODELO MODELL MODELLO MODEL MODELO MODEL Mikro komponenten system XL-DK257NH besteht aus XL-DK257NH (hauptgert) und CP-DK257NH (lautsprechersystem). Micro-chane XL-DK257NH compose de XL-DK257NH (appareil principal) et CP-DK257NH (enceinte acoustique). Sistema micro componente XL-DK257NH que consta de XL-DK257NH (aparato principal) y CP-DK257NH (sistema de altavoces). XL-DK257NH Mikro komponent system bestende av XL-DK257NH (huvudenhet) och CP-DK257NH (hgtalarsystem). [. . . ] If your iPod is not mentioned below, an iPod adaptor may have been included with your iPod unit. The number (3 - 10) shows which iPod fits ENGLISH 7 iPod Adaptor No. 3 4 5 6 7 6 7 8 9 10 iPod Description iPod mini 4G iPod & U2 iPod 4G iPod iPod photo & Colour U2 iPod iPod photo iPod with colour display iPod with colour display iPod nano 5G iPod & U2 iPod with video 5G iPod with video Capacity 4GB & 6GB 20GB 40GB 20GB & 30GB 40GB & 60GB 20GB 60GB 2GB & 4GB 30GB 60GB & 80GB Docking Station MICRO COMPONENT SYSTEM Notes: iPod nano 2G, iPod nano 3G, iPod classic and iPod touch are not compatible with the iPod adaptors listed above. Please use the adaptor supplied with your iPod unit. If you have an iPod that does not have an iPod 30 Pin connector, you can use an audio cable to connect it to the AUDIO IN socket. E-12 iPod XL-DK257NH Listening to the iPod (continued) To insert iPod adaptor 1. Press the ON/STAND-BY button to turn the power on. Open the iPod docking station by pushing the area marked " PUSH OPEN". ENGLISH To remove iPod adaptor 1. Hold this tip and pull as direction shown to remove adaptor. & STOP) PLAYBACK (PLAY 3. Insert the iPod adaptor into the iPod dock and connect your iPod. Insert the tip of a screwdriver ("" type, small) into the iPod adaptor hole as shown and lift upward to remove. pull up Dock connector iPod playback iPod iPod adaptor iPod dock iPod connector 1 2 3 Press the ON/STAND-BY button to turn the power on. Press the iPod button to select iPod function. Insert iPod unit in iPod dock of main unit. "DOCK OK" will be displayed for 3 seconds except for iPod mini and 4th Generation iPod. iPod Caution: Do not place the iPod docking base without any support from below when inserting the iPod unit, otherwise it may damage the iPod docking station. iPod adaptor To remove iPod unit Press and hold the iPod docking base when removing the iPod unit. E-13 4 Press the / button to start playback. XL-DK257NH ENGLISH To disconnect iPod Simply remove the iPod from the iPod dock. It is safe to do so even during playback. Navigating the iPod menus with the remote control 1 2 Press the CLEAR/DIMMER button to view the menu on iPod unit. Press it again to go back to previous menu. Use the TUNING ( or ) button to select an item on the menu and then press MEMORY button. Notes: If the TV Out setting is already turned On at video menu, the video is automatically displayed on the TV screen when MEMORY key is pressed. To return to watching video on iPod screen, press the CLEAR button to enter video menu. Then press the DISPLAY button for more than 2 seconds until "iPod DISP" appears. During iPod video playback, pressing the DISPLAY button will not toggle video out display between iPod and TV. iPod operation The operations described below depend on the generation iPod you are using. System on operation When the main unit is powered on, the iPod unit will automatically power on when docked in the unit (including TIMER function). [. . . ] The iPod is not making full contact with the iPod connector. Using 3rd Generation iPod. iPod will not charge. E-34 References No sound is heard. XL-DK257NH Troubleshooting chart (continued) Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, etc. ) or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc in the unit until normal playback is possible (about 1 hour). [. . . ]