User manual SHARP XL-E100H

[. . . ] ZESTAW HI-FI HI-FI RENDSZER HI-FI SYSTÉM HI-FI SYSTÉM C HI FI SISTEM HI-FI COMPONENT HI FI KOMPONENT SISTEMA HI-FI COMPONENT SYSTEM HI-FI KOMPONENTNI SISTEM HI FI COMPONENT SYSTEM MODEL MODEL MODEL MODEL MODEL MODELIS MODEL MODEL XL-E100H(BK) MANUAL DE UTILIZARE VARTOJIMO VADOVAS PRIROCNIK ZA UPORABO OPERATION MANUAL INSTRUKCJA OBSLUGI HASZNÁLATII ÚTMUTATÓ NÁVOD NA POUZITÍ NÁVOD NA POUZÍVANIE R R MC G A 226AW S A RRMCGA22 Note: This product is not compatible with MTP and AAC file systems. POLSKI MAGYAR CESKY SLOVENSKY ROMÂN LIETUVISKAI SLOVENSCINA ENGLISH Patrz strony od i do viii i od 1 PL-1 do PL-20. Lásd az i - viii és HU-1 - HU-20 oldalakat. Prosím, pozrite si strany i az viii a SK-1 az SK-20. Vezi paginile de la i la viii i de la RO-1 la RO-20. [. . . ] Press again to restore the volume. X-Bass control When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and "X-BASS" will appear. To cancel the extra bass mode, press the X-BASS button on the remote control. RRMCGA226 AWS A RRMCGA22 To turn the power on Press the ON/STAND-BY button to turn the power on. After use: Press the ON/STAND-BY button to enter the power stand-by mode. Bass control 1 Press the BASS/TREBLE button to select "BASS". 2 Within 5 seconds, press the VOLUME (+ or ­) button to adjust the bass. Display brightness control To dim the display brightness, press the DEMO/DIMMER button on the remote control. Treble control 1 Press the BASS/TREBLE button to select "TREBLE". 2 Within 5 seconds, press the VOLUME (+ or ­) button to adjust the treble. Equaliser When the EQUALIZER MODE button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQUALIZER MODE button repeatedly until the desired sound mode appears. Dimmer 1 Dimmer 2 (Display is dim). (Display gets dimmer). Dimmer off (Display is bright). Volume illuminator When the power is turned on, volume illuminator lights up. To turn on/off the light, hold down the DEMO/DIMMER button on the remote control for more than 2 seconds. Flat Game Classic Pops Vocal Jazz Equaliser off. For game For classical music For pop music Vocals are enhanced For jazz Volume auto fade-in If you turn off and on the main unit with the volume set to 27 or higher, the volume starts at 16 and fades in to the last set level. Function When the FUNCTION button on main unit is pressed, the current function will change to different mode. Press the FUNCTION button repeatedly to select desired function. CD FM STEREO FM MONO AM Volume control Turn the volume knob towards VOL +/­ (on main unit) or press VOLUME +/­ (on remote control) to increase or decrease the volume. Auto power on function When you press any of the following buttons, the unit turns on. CD, USB, AUDIO / LINE (INPUT), TUNER (BAND) on the remote control: Selected function is activated. / button on the main unit: The unit turns on and playback of the last function will start (CD, TUNER, USB, AUDIO IN, LINE IN) Line In Audio In USB Note: The backup function will protect the memorised function mode for a few hours should there be a power failure or the AC power lead becomes disconnected. Auto power off function The main unit will enter the stand-by mode after 15 minutes of inactivity during: CD / USB: In the stop mode. TUNER: No reception of broadcast signal. AUDIO IN / LINE IN: No detection of input signal or very low sound audibility. E-6 Setting the clock (Remote control only) Listening to a CD or MP3/WMA disc RRMCGA226AWSA RRMCGA22 In this example, the clock is set for the 24-hour (00:00) display. 1 Press the ON/STAND-BY button to turn the power on. 3 Within 10 seconds, press the ENTER button. To adjust the day, press the ENTER button. or button and then press the RRMCGA226 RRMCGA22 AWS A 4 Press the or button to select 24-hour or 12hour display and then press the ENTER button. (00:00 - 23:59) The 12-hour display will appear. (AM 12:00 - PM 11:59) The 12-hour display will appear. (AM 00:00 - PM 11:59) This system can play back a standard CD, CD-R/RW in the CD format and CD-R/RW with MP3 or WMA files, but cannot record on them. Some audio CD-R and CD-RW discs may not be playable due to the state of the disc or the device that was used for recording. [. . . ] Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit. Care of compact discs Compact discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your CD collection and player. [. . . ]