User manual SHARP XL-E75H

[. . . ] Vidi stranicu od i do xii ili od HR-1 do HR-42. Lütfen i'den xii'a kadar ve TR-1'den TR-42'a kadar sayfalari inceleyiniz. Please refer to pages i to xii and E-1 to E-42. XL-E2180H XL-E2580H PL - WANE INFORMACJE Gdy urzdzenie znajduje si w trybie czuwania, jego wewntrzne elementy s pod napiciem. Jeli urzdzenie znajduje si w trybie czuwania, moe zosta wlczone przy pomocy pilota lub automatycznie przy pomocy zegara. [. . . ] (You cannot select the order of the tracks. ) Caution: After performing repeat or random play, be sure to press the (CD ) button. Otherwise, the disc will play continuously. To cancel repeat play: Press the PLAY MODE button again until " " disappears. E-15 XL-E2180H XL-E2580H Programmed play You can choose up to 32 selections for playback in the order you like. ENGLISH 1 While in the stop mode, press the MEMORY button on the remote control to enter the programming save mode. To clear the programmed selections: Press the CLEAR/DIMMER button on the remote control while the "MEMORY" indicator is flashing. Each time the button is pressed, one track will be cleared, beginning with the last track programmed. 2 Press the direct search buttons on the remote control to select the desired track. Selected track number You can also select a track by pressing the or button. 3 4 Press the MEMORY button to save the track number. If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR/DIMMER button. The total number in memory will appear. Adding tracks to the programme: If a programme has been previously stored, the "MEMORY" indicator will be displayed. The new tracks will be stored after the last track of the previous program. To check which tracks are programmed: While the unit is stopped in the programmed play mode, press the or button. MP3/WMA Folder programmed: Only tracks in the same folder can be select. Select which folder to be programmed before entering program mode. (refer page 17 to select folder) Notes: When a disc is ejected, the program is automatically cancelled. Playback will start and file name will be displayed. Title, Artist & Album name are displayed if they are recorded on the disc. Display content can be changed by pressing the DISPLAY button. 1 Press the CD button, and load an MP3/WMA disc. After disc is loaded, disc info will be displayed. MP3 indicator WMA indicator Disc Name TOTAL indicator Total number of files File Name Display TITLE-1 Indicator Title Display Function Display TITLE-2 Indicator Artist Display 2 Press the FOLDER button, and press the TUNING ( or ) button to select desired playback folder. (Folder mode on) FOLDER indicator ( ) TITLE-3 Indicator Clock Display Album Display FOLDER number Total files in Folder 3 3 Select desired file to be played back by pressing the button. or In case of playback with the folder mode on, press the TUNING ( or ) button, and the folder can be selected even though it is in playback/pause mode. It will continue playback/pause mode in the 1st track of the selected folder. ( ) Only appears when clock is already set. Note: If "NO SUPPORT" is displayed, it means "Copyright protected WMA file" or "Not supported playback file" is selected. E-18 CD or MP3/WMA disc Playback XL-E2180H XL-E2580H Listening to USB mass storage device / MP3 Player 3 Press the / (USB / ) button. Playback will start and the file name will be displayed. Title, Artist & Album name are displayed if they are recorded in the USB memory device. Display content can be changed by pressing the DISPLAY button. File Name Display TITLE-1 Indicator ENGLISH AUDIO IN Title Display Function Display TITLE-2 Indicator Artist Display USB Memory Playback Note: This product is not compatible with MTP and AAC file systems. ( ) TITLE-3 Indicator To play back USB/MP3 Player with Folder mode off Press the USB button, and lift up the USB door. [. . . ] Is the File Name written in Chinese or Japanese characters?Is the USB device in write protect mode?Is the device's memory already full? Factory Reset, Clearing All Memory 1 2 Press the ON/STAND-BY button to enter the power stand-by mode. Whilst pressing down the button, press the CD button until "CLEAR ALL" appears. CD Playback does not start. [. . . ]