User manual SHARP XL-ES50

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. [. . . ] For example, to choose 13 1 Press the "+10" button once. For example, to choose 30 1 Press the "+10" button three times. Playback of the selected track is started. When the last track on the disc has finished playing, the unit will stop automatically. Notes: " A track number higher than the number of tracks on the disc cannot be selected. " During random play, direct search is not possible. " When playing MP3 discs, you can display the track number but cannot select the folder by pressing the direct search button(s). !Random play The tracks can be played in random order automatically. While in the stop mode, press the RANDOM button on the remote control and the ( ) button sequentially to begin random play. To cancel random play: While in the stop mode, press the RANDOM button again. Notes: " Random play will stop automatically when all tracks are played once. (The same track will not be played back twice. ) " In random play, the unit will select and play tracks automatically. " " " will appear when an FM broadcast is in stereo. " If the FM reception is weak, press the FUNCTION [TUNER (BAND)] button to extinguish the "ST" indicator. The reception changes to monaural, and the sound becomes clearer. FM stereo mode indicator FM stereo receiving indicator XL-ES50 1 2 Press the ON/STAND-BY button to turn the power on. Press the FUNCTION button until "FM" or "AM" appears on the display. When operating with the remote control, press the TUNER (BAND) button to select "FM" or "AM". 19 Radio XL-ES50 Listening to the memorized station !Memorizing a station You can store up to 45 stations (30 FM stations and 15 AM stations) and recall them at the push of a button (preset tuning). !To recall a memorized station Press the PRESET ( or ) button for less than 0. 5 seconds to select the desired station. 1 2 3 Perform steps 1 - 3 in "Listening to the radio" on page 19. Press the MEMORY/SET (MEMORY) button to enter the preset tuning saving mode. Within 5 seconds, press the PRESET ( or ) button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1. [. . . ] The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. XL-ES50 !CD player Type Signal readout D/A converter Frequency response Dynamic range Compact disc player Non-contact, 3-beam semiconductor laser pickup 1-bit D/A converter 20 - 20, 000 Hz 90 dB (1 kHz) !General Power source Power consumption Dimensions AC 120 V, 60 Hz 83 W Width: 6-5/16" (160 mm) Height: 9" (228 mm) Depth: 9-13/16" (248 mm) 8. 4 lbs. [. . . ]